Abstract:We demonstrated an all-fiber comb filter that can continuously tune the wavelength for four switchable wavelength spacings. The comb filter consists of a fiber loop mirror (FLM) that is inserted with three polarization maintaining fibers (PMFs) and three polarization controllers (PCs). The transmission characteristics of the comb filter was theoretically analyzed. The output characteristics of the comb filters shows a dependence of the orientation angles of the PCs. With the angles being optimally set, the comb filter with four different wavelength spacings can be achieved. The wavelength continuously tunable and wavelength spacing variable mechanisms are elaborated. The three PCs are employed to enable the tunable and switchable functions. The two PCs between the PMFs serve as a polarization rotator to align the birefringent axes of the PMFs for varying the wavelength spacing while the PC adjacent to the optical coupler can be used for wavelength tuning function. When the two quarter-waveplates (QWPs) of the PC are optimally set at π/4 and - π/4, the half-waveplate (HWP) acts as a wavelength tuning element, and when the QWPs are set at zero degrees, the HWP serves as an amplitude tuning element. The center wavelength of the comb filter could be linearly tuned with the rotation angle of the HWP, and a π/2 change in the rotation angle leads to a wavelength change in one free-spectral-range (FSR). A π/4 change in the rotation angle could bring the normalized peak transmission from its maximum at 1 to minimum at 0. The proposed tunable technique has been verified by our experimental results. We experimentally demonstrated the comb filters can switch among FSRs of 0.75 nm, 1.01 nm, 1.51 nm, and 3.1 nm with tunable functions.

High Channel-Count Comb Filter Based on Chirped Sampled Fiber Bragg Grating and Phase Shift

High-channel-count comb filter with a simple structure

Selectable-FSR 10-Ghz Granularity WDM Superchannel Filter in a Reconfigurable Photonic Integrated Circuit

Programmable All-Fiber Structured Waveshaper Based on Linearly Chirped Fiber Bragg Grating and Digital Thermal Controller

Photonic Integrated Circuit Implementation of a Sub-Ghz-selectivity Frequency Comb Filter for Optical Clock Multiplication

Optical Interleaver Based on Multicavity Fabry-Perot Thin Film Filter

Narrow-Band Add-Drop Filter Based on Cladding-Modulated Apodized Multimode Bragg Grating

Channel-spacing tunable silicon comb filter using two linearly chirped Bragg gratings.

Design of an on-chip integrated multi-channel comb filter based on the Bragg grating structure

Periodically Chirped Sampled Fiber Bragg Gratings for Multichannel Comb Filters

Theory and Experiment on Linear Chirped Fiber Bragg Grating with Amplitude and Phase Samplings

Fibre-optic Comb Filter with Tunable Central Wavelength and Channel Isolation at Sub-Microsecond Speed

Wideband Multichannel Dispersion Compensation Based On A Strongly Chirped Sampled Bragg Grating And Phase Shifts

Tunable and Channel Spacing Precisely Controlled Comb Filters Based on the Fused Taper Technology.

A reconfigurable photonic microwave channelized receiver based on an optical comb

A Reconfigurable Microwave Photonic Channelized Receiver Based on Dense Wavelength Division Multiplexing Using an Optical Comb

Novel Flat Multichannel Filter Based on Strongly Chirped Sampled Fiber Bragg Grating

Narrow-Band Add-Drop Filter Based on Phase-Modulated Grating-Assisted Contra-Directional Couplers

Design and characterization of novel comb filters based on periodical fiber Bragg gratings

In-line flat-top comb filter based on a cascaded all-solid photonic bandgap fiber intermodal interferometer.

Wavelength continuously tunable and wavelength spacing variable comb filter based on a High-Birefringence fiber loop mirror