Abstract:We demonstrated an all-fiber comb filter that can continuously tune the wavelength for four switchable wavelength spacings. The comb filter consists of a fiber loop mirror (FLM) that is inserted with three polarization maintaining fibers (PMFs) and three polarization controllers (PCs). The transmission characteristics of the comb filter was theoretically analyzed. The output characteristics of the comb filters shows a dependence of the orientation angles of the PCs. With the angles being optimally set, the comb filter with four different wavelength spacings can be achieved. The wavelength continuously tunable and wavelength spacing variable mechanisms are elaborated. The three PCs are employed to enable the tunable and switchable functions. The two PCs between the PMFs serve as a polarization rotator to align the birefringent axes of the PMFs for varying the wavelength spacing while the PC adjacent to the optical coupler can be used for wavelength tuning function. When the two quarter-waveplates (QWPs) of the PC are optimally set at π/4 and - π/4, the half-waveplate (HWP) acts as a wavelength tuning element, and when the QWPs are set at zero degrees, the HWP serves as an amplitude tuning element. The center wavelength of the comb filter could be linearly tuned with the rotation angle of the HWP, and a π/2 change in the rotation angle leads to a wavelength change in one free-spectral-range (FSR). A π/4 change in the rotation angle could bring the normalized peak transmission from its maximum at 1 to minimum at 0. The proposed tunable technique has been verified by our experimental results. We experimentally demonstrated the comb filters can switch among FSRs of 0.75 nm, 1.01 nm, 1.51 nm, and 3.1 nm with tunable functions.

Tunable and Channel Spacing Precisely Controlled Comb Filters Based on the Fused Taper Technology.

Programmable All-Fiber Structured Waveshaper Based on Linearly Chirped Fiber Bragg Grating and Digital Thermal Controller

Selectable-FSR 10-Ghz Granularity WDM Superchannel Filter in a Reconfigurable Photonic Integrated Circuit

Tunable and Programmable Fiber Ring Laser Based on Digital-Controlled Chirped Fiber Bragg Grating

Photonic Integrated Circuit Implementation of a Sub-Ghz-selectivity Frequency Comb Filter for Optical Clock Multiplication

Wavelength-Division Multiplexed Thin-Film Filters Used in Tilted Incident Angles of Light

Fibre-optic Comb Filter with Tunable Central Wavelength and Channel Isolation at Sub-Microsecond Speed

Wavelength continuously tunable and wavelength spacing variable comb filter based on a High-Birefringence fiber loop mirror

A reconfigurable photonic microwave channelized receiver based on an optical comb

Fiber laser with dual-channel and a selectable comb filter based on Vernier effect of parallel-connected two Mach–Zehnder interferometers

Four‐tap Microwave Photonic Filter with Tunable Center Frequency and Reconfigurable Transfer Function

High Channel-Count Comb Filter Based on Chirped Sampled Fiber Bragg Grating and Phase Shift

Wide Wavelength Tuning in V-Coupled-Cavity Laser Integrated with a Fabry-Perot Filter

Design and analysis of parallel polarization-beam-splitter-based optical filter with adjustable channel spacing

TUNABLE FIBER FABRY-PEROT FILTER FOR OPTICAL CARRIER-SUPPRESSION AND SINGLE-SIDEBAND MODULATION IN RADIO OVER FIBER LINKS

Comb filter based on an all polarization maintaining fiber loop and its applications

Wavelength-spacing continuously tunable multiwavelength erbium-doped fibre laser based on DSF and MZI

Tunable and Reconfigurable Microwave Photonic Filter Implemented by Cascaded Mach-Zehnder Modulators and a Dispersive Medium

A Reconfigurable Microwave Photonic Channelized Receiver Based on Dense Wavelength Division Multiplexing Using an Optical Comb

Multi-wavelength Fiber Source with Equal Frequency Spacing

Tunable Multi-Tap Microwave Photonic Filter With Complex Coefficients Using A Dual-Parallel Mach-Zehnder Modulator