Abstract:We demonstrated an all-fiber comb filter that can continuously tune the wavelength for four switchable wavelength spacings. The comb filter consists of a fiber loop mirror (FLM) that is inserted with three polarization maintaining fibers (PMFs) and three polarization controllers (PCs). The transmission characteristics of the comb filter was theoretically analyzed. The output characteristics of the comb filters shows a dependence of the orientation angles of the PCs. With the angles being optimally set, the comb filter with four different wavelength spacings can be achieved. The wavelength continuously tunable and wavelength spacing variable mechanisms are elaborated. The three PCs are employed to enable the tunable and switchable functions. The two PCs between the PMFs serve as a polarization rotator to align the birefringent axes of the PMFs for varying the wavelength spacing while the PC adjacent to the optical coupler can be used for wavelength tuning function. When the two quarter-waveplates (QWPs) of the PC are optimally set at π/4 and - π/4, the half-waveplate (HWP) acts as a wavelength tuning element, and when the QWPs are set at zero degrees, the HWP serves as an amplitude tuning element. The center wavelength of the comb filter could be linearly tuned with the rotation angle of the HWP, and a π/2 change in the rotation angle leads to a wavelength change in one free-spectral-range (FSR). A π/4 change in the rotation angle could bring the normalized peak transmission from its maximum at 1 to minimum at 0. The proposed tunable technique has been verified by our experimental results. We experimentally demonstrated the comb filters can switch among FSRs of 0.75 nm, 1.01 nm, 1.51 nm, and 3.1 nm with tunable functions.

Multi-wavelength Fiber Source with Equal Frequency Spacing

Comb filter based on an all polarization maintaining fiber loop and its applications

Tunable and Channel Spacing Precisely Controlled Comb Filters Based on the Fused Taper Technology.

Wavelength continuously tunable and wavelength spacing variable comb filter based on a High-Birefringence fiber loop mirror

Wavelength-spacing continuously tunable multiwavelength erbium-doped fibre laser based on DSF and MZI

Wavelength-Spacing Tunable Multi-Wavelength Erbium-Doped Fiber Laser Incorporating A Semiconductor Optical Amplifier

Design and analysis of parallel polarization-beam-splitter-based optical filter with adjustable channel spacing

Fibre-optic Comb Filter with Tunable Central Wavelength and Channel Isolation at Sub-Microsecond Speed

Wavelength Conversion of Spectrum-Sliced Broadband Amplified Spontaneous Emission Light by Hybrid Four-Wave Mixing in Highly Nonlinear, Dispersion-Shifted Fibers.

Multiwavelength Linear-Cavity Fiber Laser Source Using a Sagnac Interferemetric Filter and a Strain-Induced Chirped Fiber Grating

Multiwavelength Fiber Source Using a Reflection Mach-Zehnder Filter and Double-Pass Backward Configuration

High Channel-Count Comb Filter Based on Chirped Sampled Fiber Bragg Grating and Phase Shift

Wavelength-division multiplexing isolation fiber filter and light source using cascaded long-period fiber gratings

High-power tunable sub-nm narrowband near-diffraction-limited superfluorescent fiber source based on a single-lens spectral filter

Tunable optical frequency comb with hundred-GHz spacings generated on a silicon waveguide

Linear cavity erbium-doped fiber laser employing PM-PCF based Sagnac loop comb filter for wavelength tunable laser generation

10Ghz-Spaced over 1100 Channel Flat Supercontinuum Source Generated in a Microstructure Fiber

In-line flat-top comb filter based on a cascaded all-solid photonic bandgap fiber intermodal interferometer.

Wavelength-spacing continuously tunable multi-wavelength SOA-fiber ring laser based on Mach–Zehnder interferometer

15 Μm Orthogonally Polarized Dual-Output Heralded Single Photon Source Based on Optical Fibers with Birefringence

Tunable Multiwavelength Brillouin-Erbium Fiber Laser with A Polarization-Maintaining Fiber Sagnac Loop Filter