Abstract:Zr65Al7.5Ni10Cu12.5Zn5 and Zr65Al7.5Ni5Cu17.5Zn5 metallic glasses, which were obtained by adding Zn to the well-known glass-former Zr65Al7.5Ni10Cu17.5, were prepared by a melt-spinning method and the crystallization process was studied by differential scanning calorimetry (DSC), X-ray diffraction and transmission electron microscopy. Two exothermic peaks were observed in the DSC curves. The low temperature one corresponds to the simultaneous precipitation of an icosahedral quasicrystalline phase (I-phase) and the face centered cubic Zr2Ni (FCC–Zr2Ni) phase in the Zr65Al7.5Ni10Cu12.5Zn5 alloy. The initial precipitate for the Zr65Al7.5Ni5Cu17.5Zn5 alloy is a single I-phase. Since an I-phase does not occur in the crystallization process of Zr65Al7.5Ni10Cu17.5 metallic glass, the present results demonstrate that the addition of Zn is effective in promoting the precipitation of an I-phase, in addition to the previously reported noble metals. Further annealing leads to the precipitation of other stable crystalline phases, indicating the metastable character of the I-phase and the FCC–Zr2Ni phase. The reason for the change in the crystallization process caused by the addition of Zn was discussed on the basis of the chemical affinity and atomic radius of the constituent elements.

Glass Formation in Mechanical Milled Ni-Ti-Zr-Sn Pre-Alloy Powders

Glass Formation in a Ni-Based Multicomponent Alloy by Mechanical Milling and Microwave Treatment of the Obtained Powders

On the atomic structure of Zr–Ni and Zr–Ni–Al metallic glasses

Effect of Ti and Al Ratio on Glass Forming Ability and Crystallization Behavior of Zr-Cu-Al-Ti Alloy Powders

Effect of Zn Addition on the Crystallization Process in Zr65al7.5ni10cu17.5 Metallic Glass

Glass Forming Ability and Mechanical Properties of New Ni-Based Bulk Metallic Glasses

Glass-forming Ability and Crystallization Behavior of Some Binary and Ternary Ni-based Glassy Alloys

The Relation Between Formation of Compounds and Glass Forming Ability for Zr–Al–Ni Alloys

Formation and mechanical properties of bulk Cu-Ti-Zr-Ni metallic glasses with high glass forming ability

Formation of Zr70Ni23Ti7 Glassy Alloy and Phase Transformation Upon Annealing

Formation, Thermal Stability and Mechanical Properties of Zr-Nb-Cu-Ni-Al Bulk Metallic Glasses

Glass formation, microstructure evolution and mechanical properties of Zr 41.2 Ti 13.8 Cu 12.5 Ni 10 Be 22.5 and its surrounding alloys

Crystallization Behavior of a Series of Zr-based Metallic Glasses

Unusual Solidification Behavior of a Zr–Cu–Ni–Al Bulk Glassy Alloy Made from Low-Purity Zr

Formation and Compressive Properties of A Ni-Ti-Zr-Al-Cu-Si Amorphous Alloy

Glass-Forming Ability and Thermal Properties of Al70Fe12.5V12.5X5(X = Zr, Nb, Ni) Amorphous Alloys via Minor Alloying Additions

Bulk metallic glass formation in the (Ti,Zr)-(Ni,Cu)-S system

Glass forming ability of bulk(Zr0.6Cu0.2Ni0.1Al0.1)100-xTix amorphous alloys

Glassy and Icosahedral Phases in Rapidly Solidified Ti–Zr–Hf–(Fe, Co or Ni) Alloys

Formation and Mechanical Properties of Bulk Glassy Ni57-Xti23zr15si5pdx Alloys

Relation Between Glass and Quasicrystal Formation in the Zr–Nb–Cu–Ni–Al Alloys Upon Solidification