Abstract:The oxidation behavior of the WC-CoNiFeCr functionally graded cemented carbide (FGCC) has been investigated by isothermal oxidation and composition characterization. The results showed that the oxidation of cemented carbide was closely related to the oxidation temperature and oxidation time, and the oxidation of different elements had a clear sequential order. The Cr element was first selectively oxidized to Cr 2 O 3 , followed by the oxidation of other composing elements of the multi-principal-element alloy (MPEA) binder to M x O y and MWO 4 . The WC was then oxidized to WO 3 , and WO 3 and M x O y were thereafter reacted to form MWO 4 . The binder composition, structural distribution, and WC grain size were the three key factors that affected the oxidation resistance of the cemented carbides. Fine-grained and graded cemented carbides, with CoNiFeCr MPEA binder, had the highest anti-oxidation properties. The FGCC showed lower oxidation of the binder at 600 °C, a denser MWO 4 distribution at 700 °C, and a smaller volume expansion at 800 °C, as compared with the non-graded cemented carbide (CC). Compared with the coarse-grained cemented carbide, the fine-grained cemented carbide had more grain boundaries between the WC and the binder, which resulted in a denser distribution of the binder oxides. WC-20CoNiFeCr had a higher energy barrier for the oxidation reaction and more stable oxidation products than WC-20Co. The results did not only provide theoretical guidance for the understanding of the anti-oxidation mechanism of WC-CoNiFeCr, but they also expanded a new approach for the preparation of cemented carbides with high oxidation resistance.

Finite Element Analysis of Thermal Stresses in Functionally Graded Cemented Carbides

Finite Element Analysis of Thermal Residual Stress in Ceramic Functional Graded Material: Interface Optimization for Residual Reduction

Thermal stress simulation in TiB2-Cu functionally graded materials

Fabrication and Properties of Axisymmetric WC/Co Functionally Graded Hard Metal via Microwave Sintering

A comprehensive constitutive equation for the hot deformation of WC-Co

Optimum design of W/Cu functionally graded material for thermal stress mitigation

The influence of the WC-Co composite microstructure model on stress field heterogeneity at the microstructure level: FEM based study

Microstructures and mechanical properties of the bilayer functionally graded WC-TiC-Ni/Co cemented carbides

Microstructures and Properties of WC-10 wt.%CoCrFeNiAlx Composite Cemented Carbides

First principles calculation of interfacial stability, electronic and mechanical properties of WC-304 cemented carbides

Hertzian Contact Analysis of Ceramic/Metal Functionally Graded Coating

Sintering behavior of WC-10Co-V(C, N) nanocrystalline gradient cemented carbide

Preparation of a novel dual structure graded cemented carbides induced by bidirectional diffusion

Thermodynamic analysis of the interface reaction and thermal stress of WCp/Fe composites

The Influence of Residual Stresses Induced by Grinding on the Fracture Toughness of Cemented Tungsten Carbide

Characterization and forming process of a functionally graded WC-Co/Ni composite

Investigation of the Machined Surface Integrity of WC-High-Entropy Alloy Cemented Carbide

Characterization and stress relaxation of the functionally graded WC-Co/Ni component/stainless steel joint

Oxidation behavior of functionally graded cemented carbides with CoNiFeCr multi-principal-element alloy binder

Residual Stress Distribution in Laser Alloying Zone with FeCSiB Powder