Abstract:The properties of spectrally selective solar absorber coatings can be fine-tuned by varying the thickness and composition of the individual layers. We have deposited individual layers of WAlSiN, SiON, and SiO2 of thicknesses ~940, 445, and 400 nm, respectively, for measuring the refractive indices and extinction coefficients using spectroscopic ellipsometer measurements. Appropriate dispersion models were used for curve fitting of Ψ and Δ for individual and multilayer stacks in obtaining the optical constants. The W/WAlSiN/SiON/SiO2 solar absorber exhibits a high solar absorptance of 0.955 and low thermal emissivity of 0.10. The refractive indices and extinction coefficients of different layers in the multilayer stack decrease from the substrate to the top anti-reflection layer. The graded refractive index of the individual layers in the multilayer stack enhances the solar absorption. In the tandem absorber, WAlSiN is the main absorbing layer, whereas SiON and SiO2 act as anti-reflection layers. A commercial simulation tool was used to generate the theoretical reflectance spectra using the optical constants are in well accordance with the experimental data. We have attempted to understand the gradation in refractive indices of the multilayer stack and the physics behind it by computational simulation method in explaining the achieved optical properties. In brief, the novelty of the present work is in designing the solar absorber coating based on computational simulation and ellipsometry measurements of individual layers and multilayer stack in achieving a high solar selectivity. The superior optical properties of W/WAlSiN/SiON/SiO2 makes it a potential candidate for spectrally selective solar absorber coatings.

Optical Properties of Multilayer Stack Models for Solar Selective Absorbing Surfaces

Optical property calculation of multilayer stack model for solar selective absorbing surface

Investigation in Feasibility of Molybdenum As A Back Contact Layer for Silicon Based Quantum Dot Solar Cells

Spectrally Selective Solar Absorber Coating of W/WAlSiN/SiON/SiO2 with Enhanced Absorption through Gradation of Optical Constants: Validation by Simulation

Sputtered solar selective absorbing surfaces based on aluminum and stainless steel composites

Sputtered Aluminium Composite Selective Absorbing Surfaces

Experimental comparison of extreme-ultraviolet multilayers for solar physics

Design on solar selective absorbing surface with interference effect

High Solar Absorption of a Multilayered Thin Film Structure.

Theoretical Design of a Multilayer Based Spectrally Selective Solar Absorber Applied under Ambient Conditions

Multilayered Metal-Dielectric Film Structure for Highly Efficient Solar Selective Absorption

Enhancement of Solar Absorption by a Surface-Roughened Metal–dielectric Film Structure

Numerical Study of Alloy/Nanocomposite-based Solar Selective Absorber with High Photo-Thermal Conversion Efficiency

Determination of the Optical Constants of Solar-Control Amorphous Silicon Thin Films on Float Glass

Investigation on Solar Absorption and Thermal Emittance of Al Films Deposited by Magnetron Sputtering

Optimization and Preparation of the High-Efficiency Solar Selective Absorber Based on Double W-SiO2 Cermet Layers

THE SPECTRAL RADIATIVE EFFECT OF Si/SiO2 SUBSTRATE ON MONOLAYER ALUMINUM POROUS MICROSTRUCTURE

Enhanced thermal stability of the metal/dielectric multilayer solar selective absorber by an atomic-layer-deposited Al2O3 barrier layer

High Efficient and Wide-Angle Solar Absorption with a Multilayered Metal-Dielectric Film Structure

Nano-Cr-film-based solar selective absorber with high photo-thermal conversion efficiency and good thermal stability

Microstructure and Thermal Stability of Cu/TixSiyN/AlSiN Solar Selective Absorbing Coating