Abstract:This research focused on the reaction features and kinetics of tar catalytic conversion by char based on the generation and evolution of gas products. To probe the roles of heat and catalysis in tar conversion, a micro fluidized bed reaction analyzer (MFBRA) was used to assess tar thermal cracking (TC) and catalytic cracking (CC) by char at 1073, 1123, 1173, and 1223 K. The tar cracking behavior of the individual gas components (H 2 , CO, CO 2 , and CH 4 ), generation rates, and reaction kinetics were thoroughly investigated. The results show that TC and CC included a fast (Stage-1) and slow (Stage-2) conversion stage, in which Stage-1 contributed more than 80% of the total conversion. Compared to TC, tar CC required a longer reaction time but obtained higher conversions to individual gas components and the total gas products. The final conversion ratios ( X CC/TC ) of H 2 , CO, CO 2 , and CH 4 were kept above 1 at the tested temperature. The char catalytic action was very remarkable, especially at low temperatures. In tar CC, the generation rate of individual gas components slowly declined after quickly reaching the peak, forming a relatively stable zone. The volume reaction model (VRM) well described the tar conversion behavior with and without char. Compared to TC, char lowered the activation energy ( Ea ) of gas generation. For individual gas components (H 2 , CO, CO 2 , CH 4 ) and the total gas products, the corresponding reduction degree of Ea was 25.56%, 24.18%, 22.14%, 4.75%, and 21.71%, respectively, further displaying the promoting impact of char. The evaluated generation features and kinetics of individual components in the gas products will benefit the in-situ tar removal in the biomass gasification process.

Experimental Study on Novel Biomass Gasification Reactor Integrated with Tar Catalytic Cracking

Advance in the treatment methods of biomass tar

Experimental Study on Catalytic and Thermal Cracking of Tar from Biomass Pyrolysis

Characteristics and Kinetics of In-Situ Catalytic Cracking of Biomass Tar in a Micro Dual Bed Reactor

Study on industrial application of tar cracking in biomass gasification

Catalytic Materials Based on the Catalytic Cracking of Biomass Tar

Heterogeneous Cracking Reaction of Tar over Biomass Char, Using Naphthalene As Model Biomass Tar

Influence of Catalytic Cracking of Tar on Gas Component

Mechanism of In-Situ Catalytic Cracking of Biomass Tar over Biochar with Multiple Active Sites

CATALYTIC CRACKING OF TAR DERIVED FROM BIOMASS PYROLYSIS

Experimental Investigation of Biomass Gasification in a Fluidized Bed Reactor

Investigation into Biochar Supported Fe-Mo Carbides Catalysts for Efficient Biomass Gasification Tar Cracking

Steam Reforming of Biomass Tar Model Compounds over Monolithic Catalysts

Experimental Study on the Cracking of Tar Derived from Municipal Solid Waste Gasification to Produce Syngas

Catalytic Cracking of Biomass Tar over Char Supported Nickel Catalyst

Development of A Nano-Ni-La-Fe/Al2o3 Catalyst to Be Used for Syn-Gas Production and Tar Removal after Biomass Gasification

Generation features and kinetics of gas products in bio-tar catalytic cracking by char for biomass gasification

Low-Temperature Catalytic Cracking of Biomass Gasification Tar over Ni/HZSM-5

Catalytic Cracking of Biomass Tar Using Ni Nanoparticles Embedded Carbon Nanofiber/porous Carbon Catalysts

Experimental Investigation on Catalyst Deactivation in Catalytic Cracking of Biomass Tar

In-Situ Catalytic Upgrading of Tar and Coke During Biomass/Coal Co-pyrolysis