Abstract:The decomposition of CO2in fan-type ac glow discharge reactors coated with platinum or rhodium was studied as a function of concentration of CO2in the feed, frequency, and waveform shape. The progress of the reaction was monitored with an ion-quadrupole mass spectrometer coupled with a partial pressure analyzer. CO was the main carbonaceous product with selectivities >80%. Mixtures of 2.5, 10, and 20% CO2in He were studied and the conversion is observed to increase with decreasing CO2concentration, although the power consumed by the reactor remains relatively constant. The reaction efficiency for the reaction (proportional to yield) is observed to increase with increasing CO2concentration. The frequency has little effect on the conversion of CO2in the plasma, but the plasma power consumption is observed to decrease as the frequency is increased at constant applied voltage, resulting in an increase in reaction efficiency with increasing frequency. The conversion of CO2increases with increasing input voltage in the range 411–2050 V root mean square (rms), then levels off up to 10.91 kV rms. The plasma power shows the same trend as conversion, whereas the efficiency and excitation temperature of the plasma are observed to decrease up to 2050 V rms and then level off. The effects of sine, square, and triangular waveforms were examined and found to yield similar conversions, plasma powers, and efficiencies. The order for conversion and power is square > sine>triangular and the order for efficiency is triangular>sine≈square. CO2conversion is maximized for a square waveform and low concentrations of CO2at input voltages near 2 kV rms. Conversion is independent of the ac frequency. Conversely, maximization of reaction efficiency occurs at low input voltages (<2 kV rms) and high concentrations of CO2with a triangular waveform at frequencies in the kiloHertz range. Optimization of conditions has resulted in an efficiency of 11.4% for CO2dissociation to CO and O2.

Decomposition of CO2 Using Pulsed Corona Discharges Combined with Catalyst

CONVERSION OF CO2 TO CO USING PULSED CORONA DISCHARGES AND CATALYST

Non-thermal Plasma Generation by Using Back Corona Discharge on Catalyst

Removal of Dilute VOCs in Air by Post-Plasma Catalysis over Ag-based Composite Oxide Catalysts

Decomposition of Co2 Using Dc Corona Discharge at Atmospheric Pressure

Combination Of Non-Thermal Plasma And Activated Carbon Fibers For Decomposition Of Hydrogen Sulfide

Utilizing catalyst to enhance pulse discharge for volatile organic compounds treatment

[Scale-Up Study on Pulse Corona Discharge for the Removal of Toluene].

Humidity and Oxygen Effects on Dimethyl Sulfide Decomposition Plasma Corona Reactor

Decomposition of Dimethyl Sulfide in a Wire-Cylinder Pulse Corona Reactor

Nonthermal Plasma-Assisted Catalytic Oxidation of Carbon Monoxide over CuOx@γ-Al2O3: Understanding Plasma Modification of Catalysts and Plasma–Catalyst Synergy

Factors Influencing the Decomposition of CO2in AC Fan-Type Plasma Reactors: Frequency, Waveform, and Concentration Effects

DBD Plasma Combined with Different Foam Metal Electrodes for CO2 Decomposition: Experimental Results and DFT Validations

Enhancing inter-particle microwave discharge for efficient coke-CO 2 gasification

Catalytic Non-Thermal MilliPulse Plasma for Methanation of CO2 without Carbon Deposition and Catalyst Deactivation

Investigation of Highly Efficient CO2 Hydrogenation at Ambient Conditions Using Dielectric Barrier Discharge Plasma

Effect of filling materials on CO2 conversion with a dielectric barrier discharge reactor

Corona discharge plasma-excited activation of MnZrLaCe/γ-Al 2 O 3 catalyst for simultaneous degradation of meta-xylene and ethyl acetate: Effects and mechanism

Reduction Characteristics of Carbon Dioxide Using a Plasmatron

Mechanism of CO2-formation Promotion by Au in Plasma-Catalytic Oxidation of CH4 over Au/γ-Al2O3 at Room Temperature.

The CO2 Conversion in a DBD Plasma: A 1D Synergistic Catalysis Model