Abstract:In the non-thermal plasma catalysis system, VOCs degradation was significantly affected by the position of the catalyst, as well as operation mode. Hence, it is of great significance to evaluate the performance of In Plasma Catalysis (IPC) and Post Plasma Catalysis (PPC) systems for VOCs abatement using both continuous and sequential processes. Four packed-bed dielectric barrier discharge (DBD) systems were used to degrade toluene with different catalysts under diverse voltages in this study. Results showed that the IPC mineralization rates were higher as compared to PPC, regardless of whether the continuous or sequential processes was used, and irrespective of the applied voltage and type of packed catalyst (e.g. 77.00% and 96.06% in SPPC and SIPC at 20 kV with Ag/ZSM-5 packed). However, PPC was superior to IPC in O3 and N2O reduction. As the applied voltage was raised, the mineralization rate in different reactors increased significantly, yet CO2 selectivity was insusceptible to voltage variation. NTP alone exhibited a mineralization rate and CO2 selectivity of 9.67%–22.62% and 53.85%–58.26%, respectively. While the mineralization rate and CO2 selectivity were remarkably improved with the presence of Ag/ZSM-5 (19.08%–41.59% and 93.99%–95.91% in CIPC). With respect to different catalysts investigated in this study, at 20 kV, Ag/ZSM-5 exhibited the highest mineralization rate - 96.06% in SIPC, and CO2 selectivity - 98.43% in SPPC; while the lowest concentrations of O3 (198 ppm) and N2O (8.01 ppm) were obtained in the Mn/ZSM-5 packed bed reactor. Possible reaction mechanisms were also proposed by analyzing the organic intermediates that were produced during continuous and sequential treatments, and remained in the adsorbents of IPC and PPC reactors.

Utilizing catalyst to enhance pulse discharge for volatile organic compounds treatment

Recent Advances in Catalysts for Toluene Elimination Via Catalytic Oxidation

VOCs degradation with non-thermal plasma and Ag-MnOx catalysis

Characteristics of Back Corona Discharge in a Honeycomb Catalyst and Its Application for Treatment of Volatile Organic Compounds.

Removal of Dilute VOCs in Air by Post-Plasma Catalysis over Ag-based Composite Oxide Catalysts

Promoting Effect of FeOx Addition on the Mechanochemically Prepared Vanadium-Based Catalyst for Real PCDD/Fs Removal and Mechanism Insight

Study on the degradation of VOCs in a plasma-catalyst hybrid reactor

[Scale-Up Study on Pulse Corona Discharge for the Removal of Toluene].

Decomposition of Toluene Using Nanosecond- Pulsed-Discharge Plasma Assisted with Catalysts

Non‐thermal Plasma for VOCs Abatement: Recent Advance

Study of Pt-modified chromium-manganese oxide alloys to improve the performance of toluene abatement

Study of VOCs emission control by activated carbon adsorption-plasma oxidation

Enhanced removal of toluene by pulse discharge plasma coupled with MgO cathode and graphene Mn–Ce bimetallic oxide

Cracking of toluene by corona plasma combined with MnO 2 /CeO 2 catalyst loaded on corona anode surface

Enhanced Photo-Degradation of Gaseous Toluene over MnOx/TiO2/activated Carbon under a Novel Microwave Discharge Electrodeless Lamps System

Double dielectric barrier discharge incorporated with CeO2-Co3O4/γ-Al2O3 catalyst for toluene abatement by a sequential adsorption–discharge plasma catalytic process

Toward Ideal VOCs and Nanoparticle Emission Control Technology Using a Wet-Type Catalysis Nonthermal Plasma Reactor

Plasma-catalytic oxidation of toluene over MCeZrO x /TiO 2 (M = Cu, Mn, Ni and Co) catalysts using a dielectric barrier discharge reactor

Non-thermal plasma synthesis of supported Cu-Mn-Ce mixed oxide catalyst towards highly improved catalytic performance for volatile organic compound oxidation

Treatment of VOCs with a wet scrubbing – catalytic ozonation process: Efficiency, mechanism and pilot-scale application

A comparison of in- and post-plasma catalysis for toluene abatement through continuous and sequential processes in dielectric barrier discharge reactors