Abstract:The decomposition of CO2in fan-type ac glow discharge reactors coated with platinum or rhodium was studied as a function of concentration of CO2in the feed, frequency, and waveform shape. The progress of the reaction was monitored with an ion-quadrupole mass spectrometer coupled with a partial pressure analyzer. CO was the main carbonaceous product with selectivities >80%. Mixtures of 2.5, 10, and 20% CO2in He were studied and the conversion is observed to increase with decreasing CO2concentration, although the power consumed by the reactor remains relatively constant. The reaction efficiency for the reaction (proportional to yield) is observed to increase with increasing CO2concentration. The frequency has little effect on the conversion of CO2in the plasma, but the plasma power consumption is observed to decrease as the frequency is increased at constant applied voltage, resulting in an increase in reaction efficiency with increasing frequency. The conversion of CO2increases with increasing input voltage in the range 411–2050 V root mean square (rms), then levels off up to 10.91 kV rms. The plasma power shows the same trend as conversion, whereas the efficiency and excitation temperature of the plasma are observed to decrease up to 2050 V rms and then level off. The effects of sine, square, and triangular waveforms were examined and found to yield similar conversions, plasma powers, and efficiencies. The order for conversion and power is square > sine>triangular and the order for efficiency is triangular>sine≈square. CO2conversion is maximized for a square waveform and low concentrations of CO2at input voltages near 2 kV rms. Conversion is independent of the ac frequency. Conversely, maximization of reaction efficiency occurs at low input voltages (<2 kV rms) and high concentrations of CO2with a triangular waveform at frequencies in the kiloHertz range. Optimization of conditions has resulted in an efficiency of 11.4% for CO2dissociation to CO and O2.

Factors Influencing the Decomposition of CO2in AC Fan-Type Plasma Reactors: Frequency, Waveform, and Concentration Effects

Warm Plasma Activation of CO2 in a Rotating Gliding Arc Discharge Reactor

From Chemical Kinetics to Streamer Corona Reactor and Voltage Pulse Generator

Decomposition of CO2 Using Pulsed Corona Discharges Combined with Catalyst

Inhibiting Recombination to Improve the Performance of Plasma-Based CO2 Conversion

Investigation of Highly Efficient CO2 Hydrogenation at Ambient Conditions Using Dielectric Barrier Discharge Plasma

Temperature‐Dependent Kinetics of Plasma‐Based CO2 Conversion: Interplay of Electron‐Driven and Thermal‐Driven Chemistry

Humidity and Oxygen Effects on Dimethyl Sulfide Decomposition Plasma Corona Reactor

Effect of Gas Composition on Temperature and CO2 Conversion in a Gliding Arc Plasmatron reactor: Insights for Post‐plasma Catalysis from Experiments and Computation

Reduction Characteristics of Carbon Dioxide Using a Plasmatron

Reaction-Engineering Approach for Stable Rotating Glow-to-Arc Plasma—Key Principles of Effective Gas-Conversion Processes

Advancing CO2 to CO conversion: Detailed impact analysis of atmospheric molecules in an ultrashort pulse laser filament plasma reactor

Scale-up Experiment of Plasma Reactors with Different Electrode Structure

Mechanism of plasma chemistry in CO2 hydrogenation using a dielectric barrier discharge reactor

Characteristics of the Decomposition of CO2 in a Dielectric Packed-Bed Plasma Reactor

Decomposition of Dimethyl Sulfide in Dielectric Barrier Plasma Discharge Assisted by Active Carbon

Characteristics of Carbon Dioxide Reforming of Methane via Alternating Current (AC) Corona Plasma Reactions

Combination Of Non-Thermal Plasma And Activated Carbon Fibers For Decomposition Of Hydrogen Sulfide

Decomposition of Dimethyl Sulfide in a Wire-Cylinder Pulse Corona Reactor

Influence of balance gas mixture on decomposition of dimethyl sulfide in a wire-cylinder pulse corona reactor.

Performance analysis of a 2.45 GHz microwave plasma torch for CO$_2$ decomposition in gas swirl configuration