Abstract:Atmospheric pressure plasmas have shifted in recent years from being a burgeoning research field in the academic setting to an actively investigated technology in the chemical, oil, and environmental industries. This is largely driven by the climate change mitigation efforts, as well as the evident pathways of value creation by converting greenhouse gases (such as CO2) into useful chemical feedstock. Currently, most high technology readiness level (TRL) plasma-based technologies are based on volumetric and power-based scaling of thermal plasma systems, which results in large capital investment and regular maintenance costs. This work investigates bringing a quasi-thermal (so-called "warm") plasma setup, namely, a gliding arc plasmatron, from a lab-scale to a pilot-scale capacity with an increase in throughput capacity by a factor of 10. The method of scaling is the parallelization of plasmatron reactors within a single housing, with the aim of maintaining a warm plasma regime while simultaneously improving build cost and efficiency (compared to separate reactors operating in parallel). Special attention is also given to the safety and control features implemented in the setup, a key component required for integration into industrial systems. The performance of the multi-reactor gliding arc plasmatron (MRGAP) reactor is investigated, focusing on the influence of flow rate and the number of active reactors. The location of active reactors was deemed to have a negligible effect on the monitored metrics of conversion, energy efficiency, and energy cost. The optimum operating conditions were found to be with the most active reactors (five) at the highest investigated flow rate (80 L/min). Analysis of results suggests that an optimum conversion (9%) and plug power-based energy efficiency (19%) can be maintained at a specific energy input (SEI) around 5.3 kJ/L (or 1 eV/molecule). The concept of parallelization of plasmatron reactors within a singular housing was demonstrated to be a viable method for scaling up from a lab-scale to a prototype-scale device, with performance analysis suggesting that increasing the power (through adding more reactor channels) and total flow rate, while maintaining an SEI around 5.3 or 4.2 kJ/L, i.e., 1.3 or 1 eV/molecule (based on plug power and plasma-deposited power, respectively), can result in increased conversion rate without sacrificing absolute conversion or energy efficiency.

Inhibiting Recombination to Improve the Performance of Plasma-Based CO2 Conversion

Advancing CO2 to CO conversion: Detailed impact analysis of atmospheric molecules in an ultrashort pulse laser filament plasma reactor

Plasma Chemical Looping: Unlocking High-Efficiency CO2 Conversion to Clean CO at Mild Temperatures

CO 2 Conversion in a Gliding Arc Plasma: Performance Improvement Based on Chemical Reaction Modeling

Temperature‐Dependent Kinetics of Plasma‐Based CO2 Conversion: Interplay of Electron‐Driven and Thermal‐Driven Chemistry

Plasma based CO 2 conversion into value added products : better insights from computer modelling

Boosting the Conversion of CO2 with Biochar to Clean CO in an Atmospheric Plasmatron: A Synergy of Plasma Chemistry and Thermochemistry

Gliding Arc Plasma for CO2 Conversion: Better Insights by a Combined Experimental and Modelling Approach

Enhancing CO2 Conversion Via Atmospheric Pressure Glow Discharge Plasma Jet Coupled with Catalysts

The Plasma Enhanced Surface Reactions in a Packed Bed Dielectric Barrier Discharge Reactor

A novel plasma-assisted hollow fiber membrane concept for efficiently separating oxygen from CO in a CO2 plasma

Plasma Catalysis-Driven Decomposition of CO2: Optimizing Energy Distribution with NiCo-CuO Catalyst

Warm Plasma Activation of CO2 in a Rotating Gliding Arc Discharge Reactor

Highly effective CO 2 splitting in a plasma-assisted membrane reactor

AC-driven Atmospheric Pressure Glow Discharge Co-Improves Conversion and Energy Efficiency of CO2 Splitting

Upscaling Plasma-Based CO2 Conversion: Case Study of a Multi-Reactor Gliding Arc Plasmatron

CO2 conversion in non-thermal plasma and plasma/g-C3N4 catalyst hybrid processes

Effect of Gas Composition on Temperature and CO2 Conversion in a Gliding Arc Plasmatron reactor: Insights for Post‐plasma Catalysis from Experiments and Computation

Boudouard Reaction Driven by Thermal Plasma for Efficient CO2 Conversion and Energy Storage

Co2 Conversion by Plasma Technology: Insights from Modeling the Plasma Chemistry and Plasma Reactor Design

Dissociation of CO2 by Thermal Plasma with Contracting Nozzle Quenching