Abstract:The direct electrochemical reduction reaction of carbon dioxide (eCO2RR) captured from the ambient air into base chemicals and fuels holds great potential for an elegant implementation of a net-zero emission carbon cycle. This assumes that the energy used to drive the capturing and conversion process is largely free of carbon dioxide emissions, i.e., from renewables such as wind and photovoltaics. Moreover, high Faradaic efficiency for the desired products at sufficiently high current density in eCO2RR has to be demonstrated to compete with more conventional multi-step Power-to-X conversion schemes both in terms of overall energy efficiency and cost.[1] eCO2RR is known for its wide variety of products.[2] However, hydrogen evolution reaction (HER), which is more thermodynamically reactive, inevitably seizes protons and electrons in the cathode. In addition, the reaction pathway of C2+ products is more complex than that of C1 products because it is strongly dependent on the catalyst surface and electrocatalytic operating conditions. For example, the formation of C-C bonds is interfered with the formation of C-H and C-O bonds on the catalyst surface, resulting in the direct generation of multi-carbon products technically challenging.[3] Due to these kinetic barriers, the C2+ products show much lower the energy efficiency, Faraday efficiency, and partial reduction current density of than those of the C1 products. The mechanistic aspects of the reaction pathways for the various C2+ products have not been fully deciphered, which ultimately limits the commercial application of eCO2RR conversion to C2+ products.[4] Noting that industrial thermocatalytic processes produce and supply long-chain hydrocarbons in a long-term stable manner, we propose the production of C2+ products by combining simultaneous thermocatalysis and electrocatalysis. In the ongoing work, hydrogen from the water electrolysis is further converted to syngas via a reverse water-gas shift reaction (rWGS), followed by an established conversion route to fuels and chemicals such as Fischer-Tropsch or methanol synthesis and methanol to olefins, gasoline or jet fuel.[5] Here, a reactor and test bench capable of operating at 20 bar and 200 degrees Celsius have been fabricated to enable simultaneous thermocatalytic and electrocatalytic production of C2+ products. Furthermore, different catalysts can be employed to explore the catalytic processes on the catalyst surface. References [1] H. Shin, K.U. Hansen, F. Jiao, Techno-economic assessment of low-temperature carbon dioxide electrolysis, Nature Sustainability 4 (2021) 911-919. [2] J. Chen, T. Wang, Z. Li, B. Yang, Q. Zhang, L. Lei, P. Feng, Y. Hou, Recent progress and perspective of electrochemical CO2 reduction towards C2-C5 products over non-precious metal heterogeneous electrocatalysts, Nano Research 14 (2021) 3188-3207. [3] K.D. Yang, C.W. Lee, K. Jin, S.W. Im, K.T. Nam, Current status and bioinspired perspective of electrochemical conversion of co2 to a long-chain hydrocarbon, J Phys Chem Lett 8 (2017) 538-545. [4] Y. Zheng, A. Vasileff, X. Zhou, Y. Jiao, M. Jaroniec, S.Z. Qiao, Understanding the roadmap for electrochemical reduction of co2 to multi-carbon oxygenates and hydrocarbons on copper-based catalysts, J Am Chem Soc 141 (2019) 7646-7659. [5] H. Kirsch, U. Sommer, P. Pfeifer, R. Dittmeyer, Power-to-fuel conversion based on reverse water-gas-shift, Fischer-Tropsch Synthesis and Hydrocracking: Mathematical modeling and simulation in Matlab/Simulink, Chemical Engineering Science 227 (2020) 115930.

Carbon Dioxide reduction by non-equilibrium electrocatalysis plasma reactor

CO 2 Electrolysis System under Industrially Relevant Conditions

Simultaneous Operability of Thermocatalytic and Electrocatalytic CO2 Reduction Reactions

Disentangling metallic cobalt sites and oxygen vacancy effects in synergistic plasma-catalytic CO2/CH4 conversion into oxygenates

Plasma-enabled electrification of chemical processes toward decarbonization of society

Catalytic Non-Thermal MilliPulse Plasma for Methanation of CO2 without Carbon Deposition and Catalyst Deactivation

The CO2 Conversion in a DBD Plasma: A 1D Synergistic Catalysis Model

(Invited) Plasma Catalysis: An Emerging Electrification Technology for Sustainable Production of Fuels and Chemicals

Methane Dry Reforming over Ni/Al2O3 Catalyst in Spark Plasma Reactor: Linking Computational Fluid Dynamics (CFD) with Reaction Kinetic Modelling

CO2 conversion to CO via plasma and electrolysis: a techno-economic and energy cost analysis

CO Electroreduction: Current Development and Understanding of Cu-Based Catalysts

Plasma Assisted Catalytic Conversion of CO2 and H2O Over Ni/Al2O3 in a DBD Reactor

Investigation of Highly Efficient CO2 Hydrogenation at Ambient Conditions Using Dielectric Barrier Discharge Plasma

Remodelling the chlor-alkali electrolysis process to co-generate useful reduction products from CO2

Electrochemical CO2 Reduction: Electrocatalyst, Reaction Mechanism, and Process Engineering

Non-thermal plasma-catalytic processes for CO2 conversion toward circular economy: fundamentals, current status, and future challenges

Direct Low Concentration CO2 Electroreduction to Multicarbon Products Via Rate-Determining Step Tuning

Enhanced CO2 Electroreduction to Multi‐Carbon Products on Copper via Plasma Fluorination

Dielectric Barrier Discharge Plasma-Assisted Catalytic CO2 Hydrogenation: Synergy of Catalyst and Plasma

Plasma assisted CO$_2$ splitting to carbon and oxygen: A concept review analysis

Selective and High Current CO 2 Electro-Reduction to Multicarbon Products in Near-Neutral KCl Electrolytes