Abstract:Plasma-based dry reforming in an atmospheric dielectric barrier discharge (DBD) reactor has been thoroughly studied by combination of experiments and detailed kinetics simulation. With the assistances of in-situ optical emission spectroscopy (OES) measurements and reaction pathway analysis based on plasma kinetic simulation considering non-constant electric field and thermal effects, this study provided deep insights into the reaction mechanism of plasma-based dry reforming under varied feeding gas composition, gas residence time and operation temperature. A CH4 conversion as high as 44.76 % could be achieved without catalyst at 300 °C, with an SEI of 78 J/cm3 and feeding CH4 ratio of 50 %. Increase of feeding CH4 proportions were found to enhance the generation of C2 and C3 hydrocarbons. Consistently, the OES analysis showed that the relative intensities of spectra bands induced by deexcitation of CH, CO, and C2 also increased monotonically. With the same increment in SEI, increasing gas residence time led to larger promotions in CH4 and CO2 conversion, as being compared to increase of input power. The reason could be explained as that CH4 and CO2 molecules experienced more successive micro-discharges with a longer gas residence time, so more energy would be devoted into CH4/CO2 conversion, whereas more energy was dissipated into heat as rudely increased the discharge power due to the limit of reaction time. CO2 conversion continuously decreased with increasing gas temperature, owing to the recombination of CO and O enhanced at higher gas temperatures. Reaction pathway analysis showed that CH4 conversion was mainly induced by electronic dissociation and ionization at the discharge stage, while CO2 was mainly converted by recombination reaction CO2 + CH2 → CH2O + CO and also electron collision vibrational reaction e + CO2 → e + CO2(vn). The formation of C2 hydrocarbon products was supposed to follow the path of CH4 ↔ CH3/CH → C2H6 ↔ C2H5 ↔ C2H4 → C2H2.

Characteristics of Carbon Dioxide Reforming of Methane via Alternating Current (AC) Corona Plasma Reactions

Carbon Dioxide Reforming of Methane to Syngas by Thermal Plasma

Thermodynamics Characteristics Of Co2 Reforming Via Corona Plasma Reaction

Hydrogen produced via nonequilibrium plasma reactions

Carbon Dioxide and Methane Reforming Using DC Arc Plasma Reactor

AC/DC Power Modulation for Corona Plasma Generation

Dry Reforming of Methane with Carbon Dioxide Using Pulsed Dc Arc Plasma at Atmospheric Pressure

Progress on Reforming of Carbon Dioxide and Methane to Synthesis Gas by Thermal Plasma

Facilitating CO2–CH4 Reforming Into Syngas and Useful Chemicals by Water‐Cooled Dielectric Barrier Discharge Plasma: Effect of Discharge Power, Gas Mixing, and Mechanism Insight

From Chemical Kinetics to Streamer Corona Reactor and Voltage Pulse Generator

Characteristics Of Styrene Removal With An Ac/Dc Streamer Corona Plasma System

CH4 reforming with CO2 using a nanosecond pulsed dielectric barrier discharge plasma

Investigation of Highly Efficient CO2 Hydrogenation at Ambient Conditions Using Dielectric Barrier Discharge Plasma

Investigation of Dry Reforming of Methane in a Dielectric Barrier Discharge Reactor

Steam Enhanced Carbon Dioxide Reforming of Methane in DBD Plasma Reactor

Chemical Insights into Plasma-Assisted Dry Reforming of Methane in a Nanosecond Discharge

Mechanism of plasma chemistry in CO2 hydrogenation using a dielectric barrier discharge reactor

Methane Dry Reforming over Ni/Al2O3 Catalyst in Spark Plasma Reactor: Linking Computational Fluid Dynamics (CFD) with Reaction Kinetic Modelling

Reaction mechanism explorations on non-thermal plasma reforming of CO2-CH4 by combining kinetics modeling and emission spectroscopy measurements

Warm Plasma Activation of CO2 in a Rotating Gliding Arc Discharge Reactor

Plasma Assisted Dry Methane Reforming Using Gliding Arc Gas Discharge: Effect of Feed Gases Proportion