Abstract:Plasma-based dry reforming in an atmospheric dielectric barrier discharge (DBD) reactor has been thoroughly studied by combination of experiments and detailed kinetics simulation. With the assistances of in-situ optical emission spectroscopy (OES) measurements and reaction pathway analysis based on plasma kinetic simulation considering non-constant electric field and thermal effects, this study provided deep insights into the reaction mechanism of plasma-based dry reforming under varied feeding gas composition, gas residence time and operation temperature. A CH4 conversion as high as 44.76 % could be achieved without catalyst at 300 °C, with an SEI of 78 J/cm3 and feeding CH4 ratio of 50 %. Increase of feeding CH4 proportions were found to enhance the generation of C2 and C3 hydrocarbons. Consistently, the OES analysis showed that the relative intensities of spectra bands induced by deexcitation of CH, CO, and C2 also increased monotonically. With the same increment in SEI, increasing gas residence time led to larger promotions in CH4 and CO2 conversion, as being compared to increase of input power. The reason could be explained as that CH4 and CO2 molecules experienced more successive micro-discharges with a longer gas residence time, so more energy would be devoted into CH4/CO2 conversion, whereas more energy was dissipated into heat as rudely increased the discharge power due to the limit of reaction time. CO2 conversion continuously decreased with increasing gas temperature, owing to the recombination of CO and O enhanced at higher gas temperatures. Reaction pathway analysis showed that CH4 conversion was mainly induced by electronic dissociation and ionization at the discharge stage, while CO2 was mainly converted by recombination reaction CO2 + CH2 → CH2O + CO and also electron collision vibrational reaction e + CO2 → e + CO2(vn). The formation of C2 hydrocarbon products was supposed to follow the path of CH4 ↔ CH3/CH → C2H6 ↔ C2H5 ↔ C2H4 → C2H2.

Thermodynamics Characteristics Of Co2 Reforming Via Corona Plasma Reaction

Characteristics of Carbon Dioxide Reforming of Methane via Alternating Current (AC) Corona Plasma Reactions

Progress on Reforming of Carbon Dioxide and Methane to Synthesis Gas by Thermal Plasma

Hydrogen produced via nonequilibrium plasma reactions

Carbon Dioxide Reforming of Methane to Syngas by Thermal Plasma

From Chemical Kinetics to Streamer Corona Reactor and Voltage Pulse Generator

Facilitating CO2–CH4 Reforming Into Syngas and Useful Chemicals by Water‐Cooled Dielectric Barrier Discharge Plasma: Effect of Discharge Power, Gas Mixing, and Mechanism Insight

Basic Research on Conversion of Greenhouse Gases by Thermal Plasma Technique

Temperature‐Dependent Kinetics of Plasma‐Based CO2 Conversion: Interplay of Electron‐Driven and Thermal‐Driven Chemistry

AC/DC Power Modulation for Corona Plasma Generation

Investigation of Highly Efficient CO2 Hydrogenation at Ambient Conditions Using Dielectric Barrier Discharge Plasma

Reaction mechanism explorations on non-thermal plasma reforming of CO2-CH4 by combining kinetics modeling and emission spectroscopy measurements

CH4 reforming with CO2 using a nanosecond pulsed dielectric barrier discharge plasma

Carbon Dioxide and Methane Reforming Using DC Arc Plasma Reactor

Mechanism of plasma chemistry in CO2 hydrogenation using a dielectric barrier discharge reactor

Warm Plasma Activation of CO2 in a Rotating Gliding Arc Discharge Reactor

CO 2 conversion by plasma: how to get efficient CO 2 conversion and high energy efficiency

Carbon Dioxide reduction by non-equilibrium electrocatalysis plasma reactor

Conversion mechanism of thermal plasma-enhanced CH4-CO2 reforming system to syngas under the non-catalytic conditions

Reduction Characteristics of Carbon Dioxide Using a Plasmatron

Inhibiting Recombination to Improve the Performance of Plasma-Based CO2 Conversion