Abstract:Micro-flow channel is basic functional component of microfluidic chip, and every step-forward of its construction technique has been receiving concern all over the world. This article presents a notcomplicated but flexible method for fabrication of micro-flow channels. This method mainly utilizes the conventional molding capability of polydimethylsiloxane (PDMS) and widespread commercial microwires as templates. We have fabricated out some conventional types of microchannels with different topological shapes, as examples for the demonstration of this flexible fabrication route which was not dependent on the stringent demands of photolithographical or microelectromechanical system (MEMS) techniques. The smooth surface, high-intensity, and high flexibility of the wires made it possible to create many types of topological structures of the two-dimensional or three-dimensional microchannel or channel array. The geometric shape of the cross-section of thus forming microchannel in PDMS was the negative of that of embedded-in microwire, in high-fidelity if suitable measures were taken. Moreover, such a microchannel fabrication process can easily integrate the conductivity and low resistivity of the metal wire to create micro-flow devices that are suitable for the electromagnetic control of liquid or the temperature regulation in the microchannel. Furthermore some preliminary optical analysis was provided for the observation of thus forming rounded microchannel. Based on this molding strategy, we even made some prototypes for functional microflow application, such as microsolenoids chip and temperature control gadgets. And an experiment of forming a droplet in the cross channel further confirmed the feasibility and applicability of this flexible microchannel forming technique.

Fabrication of Micro/Nanofluidic System with Water-Dissolvable Nanowires

Simple and Cost-Effective Fabrication of Two-Dimensional Plastic Nanochannels from Silica Nanowire Templates

Fabrication of Nanochannels with Water-Dissolvable Nanowires

Design and fabrication of a nanofluidic channel by selective thermal oxidation and etching back of silicon dioxide made on a silicon substrate

Fabrication of 1-d nanochannels on PMMA substrate by photoresist-free uv lithography and UV-assisted bonding under low temperature

Fabrication of Fluidic Chips with 1-D Nanochannels on PMMA Substrates by Photoresist-Free UV-lithography and UV-assisted Low-Temperature Bonding

Fabricating Technologies of Nanofluidic Chips and Their Applications

Fabrication of Micro/Nanofluidic Chip on Glass Substrate and Its Application for Electrokinetic Concentration of Proteins

Fabrication of micro/nano fluidic channels by nanoimprint lithography and bonding using SU-8

Fabrication of Enclosed Nanofluidic Channels by UV Cured Imprinting and Optimized Thermal Bonding of SU-8 Photoresist

Fabrication of Micro/nano Fluidic System Combining Hybrid Mask-Mould Lithography with Thermal Bonding

Fabrication of polydimethylsiloxane nanofluidic chips under AFM tip-based nanomilling process

Fabrication And Characterization Of Sub-100/10nm Planar Nanofluidic Channels By Triple Thermal Oxidation And Silicon-Glass Anodic Bonding

Integrated fabrication of micro/nano-fluidic chip based on nano-imprint lithography and bonding

Fabrication of Microfluidic Systems in Poly(dimethylsiloxane)

Creating Sub-50 Nm Nanofluidic Junctions in PDMS Microfluidic Chip Via Self-Assembly Process of Colloidal Particles.

Fabrication of SU-8 Photoresist Micro–nanofluidic Chips by Thermal Imprinting and Thermal Bonding

PDMS Microchannel Fabrication Technique Based on Microwire-Molding

A Novel Method for Fabrication of Micro-Nanofluidic Devices and Its Application in Trace Enrichment

Fabrication of Size Controllable SU-8 Nanochannels Using Nanoimprint Lithography and Low-Pressure Thermal Bonding Methods

Review article: Fabrication of nanofluidic devices.