Abstract:Currently, various methods for fabricating microfluidic paper-based analytical devices (mu PADs) have been proposed due to their great potential applications in many fields such as clinical diagnosis, food quality control and environmental monitoring. Hereby, a novel and simple method for the fabrication of microfluidic paper-based analytical devices via plasma treatment is reported. Paper was first hydrophobized via octadecyltrichlorosilane (OTS) silanization. The OTS silanized paper was then region-selectively plasma-treated via a mask with channel network. The plasma-exposed area of the paper was turned to hydrophilic channel network due to the degradation of hydrophobic OTS molecules coupled to the paper's cellulose fibres before. Two types of hybrid polymethylmethacrylate-polydimethylsiloxane (PMMA-PDMS) masks were developed to obtain well defined hydrophilic channel with the required depth. With the elastic PDMS piece adhered to the rigid PMMA piece, it excellently solved the problem of the expansion of hydrophilic channel caused by the leakage of plasma atmosphere in the gap between the mask and paper. The effect of plasma-treating time on hydrophilicity of paper was investigated. The water contact angle (WCA) dramatically decreased from 133.9 degrees +/- 1.3 degrees to 0 degrees with the prolonging of the plasma treating time from 0 s to 30 s. Meanwhile, the depth of wettable channel could also increase to nearly the thickness (180 mu m) of the paper after treated for 30 s. Attenuated total reflectance Fourier transformed infrared (ATR-FT-IR) spectrometer and X-ray photoelectron spectroscopy (XPS) were applied to characterize the surface chemistry of paper during silanization and plasma treatment, and the related mechanism was discussed. The fabricated mu PAD was applied for detection of plasma glucose in whole blood. After diluted with 2% NaCl by a ratio of 1: 4, plasma could be separated from blood cells due to their different mobility in the channel on paper. The separated plasma reached test readout zone and reacted with the substrates of Trinder's reaction. The analytical results observed with the mu PAD-based colorimetric assays agreed well with those determined by conventional glucose meter.

Method for fabrication of paper-based microfluidic devices by alkylsilane self-assembling and UV/O3-patterning.

Fabrication of paper-based microfluidic devices by octadecyltrichlorosilane self-assembling and uv-patterning

Facile Method for the Preparation of Superhydrophobic Cellulosic Paper

Rapid Fabrication of Modular 3D Paper-Based Microfluidic Chips Using Projection-Based 3D Printing

Fabrication of Paper-Based Microfluidics by Spray on Printed Paper

Low-cost Fabrication of a Paper-Based Microfluidic Using a Folded Pattern Paper.

Preparation of hybrid soda-lime/quartz glass chips with wettability-patterned channels for manipulation of flow profiles in droplet-based analytical systems.

Paper-based microfluidics with high resolution, cut on a glass fiber membrane for bioassays.

A low-cost and rapid microfluidic paper-based analytical device fabrication method: flash foam stamp lithography

Facial Fabrication of Paper-Based Flexible Electronics with Flash Foam Stamp Lithography

Rapid Fabrication of Paper-Based Microfluidic Analytical Devices with Desktop Stereolithography 3d Printer

Surface Modification of Poly(dimethylsiloxane)-fabricated Microfluidic Chip by UV Radiation

3D Printed Paper-Based Microfluidic Analytical Devices

Fabrication of 1-d nanochannels on PMMA substrate by photoresist-free uv lithography and UV-assisted bonding under low temperature

An Approach for Irreversible Bonding of PDMS-PS Hybrid Microfluidic Chips at Room Temperature

Fabrication of Fluidic Chips with 1-D Nanochannels on PMMA Substrates by Photoresist-Free UV-lithography and UV-assisted Low-Temperature Bonding

Fabrication of Paper-Based Microfluidic Devices by Plasma Treatment and Its Application in Glucose Determination

Fabrication and research of superhydrophobic paper for oil-water separation

Microfluidic PDMS on Paper (POP) Devices

Facile Microembossing Process for Microchannel Fabrication for Nanocellulose-Paper-Based Microfluidics

Water-based alkyl ketene dimer ink for user-friendly patterning in paper microfluidics