Abstract:Since the monumental work conducted by Whitesides et al. in 2007, research and development of paper-based microfluidics has been widely carried out, with its applications ranging from chemical and biological detection and analysis, to environmental monitoring and food-safety inspection. Paper-based microfluidics possesses several competitive advantages over other substrate materials, such as being simple, inexpensive, power-free for fluid transport, lightweight, biodegradable, biocompatible, good for colorimetric tests, flammable for easy disposal of used paper-based diagnostic devices by incineration, and being chemically modifiable. Myriad methods have been demonstrated to fabricate paper-based microfluidics, such as solid wax printing, cutting, photolithography, microembossing, etc. In this study, fabrication of paper-based microfluidics was demonstrated by spray on the printed paper. Different from the normally used filter papers, printing paper, which is much more accessible and cheaper, was utilized as the substrate material. The toner was intended to serve as the mask and the patterned hydrophobic barrier was formed after spray and heating. The processing parameters such as toner coverage on the printing paper, properties of the hydrophobic spray, surface properties of the paper, and curing temperature and time were systematically investigated. It was found that, after repetitive printing four times, the toner was able to prevent the hydrophobic spray (the mixture of PDMS and ethyl acetate) from wicking through the printing paper. The overall processing time for fabrication of paper-based microfluidic chips was less than 10 min and the technique is potentially scalable. Glucose detection was conducted using the microfluidic paper-based analytical devices (μPADs) as fabricated and a linear relationship was obtained between 1 and 10 mM.

Paper-based microfluidics with high resolution, cut on a glass fiber membrane for bioassays.

Rapid Fabrication of Modular 3D Paper-Based Microfluidic Chips Using Projection-Based 3D Printing

Fabrication of paper-based microfluidic devices by octadecyltrichlorosilane self-assembling and uv-patterning

Method for fabrication of paper-based microfluidic devices by alkylsilane self-assembling and UV/O3-patterning.

Low-cost Fabrication of a Paper-Based Microfluidic Using a Folded Pattern Paper.

From Microfluidic Paper-Based Analytical Devices to Paper-Based Biofluidics with Integrated Continuous Perfusion.

Fabrication of paper-based microfluidic analysis devices: a review

Fabrication of full glass chips with hybrid micro- and nanochannels and their application to protein concentration

Fabrication of Micro/Nanofluidic Chip on Glass Substrate and Its Application for Electrokinetic Concentration of Proteins

A low-cost and rapid microfluidic paper-based analytical device fabrication method: flash foam stamp lithography

Three-dimensional Microporous Hollow Fiber Membrane Microfluidic Device Integrated with Selective Separation and Capillary Self-Driven for Point-of-care Testing.

Fabrication of Paper-Based Microfluidics by Spray on Printed Paper

Paper-based cell culture microfluidic system

Laser-etched grooves for rapid fluid delivery for a paper-based chemiresistive biosensor

3D Printed Paper-Based Microfluidic Analytical Devices

Bonding of Glass-Based Microfluidic Chips at Low- or Room-Temperature in Routine Laboratory

Rapid Customization of 3d Integrated Microfluidic Chips Via Modular Structure-Based Design

Fabrication Techniques of Microfluidic Paper-Based Chips and Their Applications

Rapid Fabrication of Paper-Based Microfluidic Analytical Devices with Desktop Stereolithography 3d Printer

Micro Fabrication of Micro Fluidic Glass Chip Without Clean Room Condition

Microfluidic Time-Delay Valve Mechanism on Paper-Based Devices for Automated Competitive ELISA