Abstract:Cu alloys have been widely used in the manufacture of liners because of their high density, good plasticity, and excellent thermal conductivity. In order to achieve excellent jet stability and penetration performance, it is necessary to further improve the mechanical properties of Cu-based liners. Nevertheless, the simultaneous enhancement of strength and ductility of the Cu alloys remains a huge challenge due to the strength–ductility trade-off phenomenon of metals/alloys. In this study, the microstructure evolution of rare earth Nd-modified Cu alloy and its effect on mechanical properties were investigated using OM, SEM, EBSD, and TEM techniques. The results show that the ultimate tensile strength (218 MPa) and elongation (50.7%) of sample 1 without Nd are the lowest. With increasing Nd content; the tensile strength and elongation of the samples increase; and the mechanical properties of sample 4 are the best, with a tensile strength of 278.6 MPa and elongation of 65.2%. In addition, with the increase in Nd content, not only is the grain size of the Cu-Nd alloy refined, but also the strength and plasticity are improved so that the strength–ductility trade-off phenomenon is improved. The strength improvement is mainly attributed to grain refinement strengthening, dispersion strengthening, and strain hardening. The increase in ductility is mainly related to the improvement of the microstructure heterogeneity by the Nd element.

Influence of rare earth and its oxide on properties of W-Cu alloy

Enhanced the Mechanical Properties and Corrosion Resistance of Ultra-Coarse Grain WC-8Co Cemented Carbides by the Introduction of Cu and Ni

Effect of Rare Earth Oxide Addition on the Microstructure and Properties of Ultrafine Grain W-20Cu Composites

Effects of rare-earth additions on the microstructure and strength of Cu–Ag composites

Effect of Rare Earth Addition on Microstructural, Mechanical and Electrical Characteristics of Cu-6%Fe Microcomposites

Effects of Rare Earth Additions on Compound Structure and As-Annealed Properties of Cu-12%Ag

Microstructure, mechanical properties and wear resistance of rare earth doped WC/steel matrix composites:Experimental and calculations

Influence of rare earth element la on the performance of copper-based composites

Microstructure and properties of typical equiatomic CrMnFeCoNi high entropy alloy doped with different rare earth elements

Effect of Rare Earth on the Microstructure and Performance of Electrodeposited Ni-W Coatings

Effects of Rare Earth Y Addition on Microstructural and Properties of Pure Copper

Effect of rare-earth elements on the interface of WC/α-Fe cemented carbide: A first-principles calculation

Rare Earth's Influence on Wear Resistance of Spray-melted Coatings with Mixture of Ni60B and 35Mass.%wc

Influence of Rare Earth Addition on Microstructure and Properties of the High Strength Cast Steel

Fabrication of W–Cu/CeO2 Composites with Excellent Electric Conductivity and High Strength Prepared from Copper-Coated Tungsten and Ceria Powders

Rare earth effect on microstructure, mechanical and tribological properties of CoCrW coatings

Effect of Microalloying Rare-Earth Nd on Microstructure Evolution and Mechanical Property of Cu Alloy

Effect of rare earth oxide doping on microstructure and mechanical property of Mo-30 W solid solution alloy

Effect of Rare Earth Element Ce on Microstructure and Properties of Aluminum Rod for Electrical Purpose

Influence of TiC Content on Microstructure and Properties of W-3OCu/TiC Composites

The Influence of Rare Earth Ce on the Microstructure and Properties of Cast Pure Copper