Abstract:The impacting and rebounding behaviors of straight elastic components are investigated and a unified approach is proposed to analytically predict the whole process of the collision and rebounding of straight elastic bars and beams after each of them impinges on ideal (massless) elastic spring(s). The mathematical problems with definitive solution are formulated, respectively, for both the constrained-motion and free-motion stages, and the method of mode superposition, which is concise and straightforward especially for long-time interaction and multiple collision cases, is successfully utilized by repeatedly altering boundary and initial conditions for these successive stages. These two stages happen alternatively and the collision process terminates when the constrained motion no longer occurs. In particular, three examples are investigated in detail; they are: a straight bar impinges on an ideal elastic spring along its axis, a straight beam vertically impinges on an ideal elastic spring at the beam's midpoint, and a straight beam vertically impinges on two ideal springs with the same stiffness at the beam's two ends. Numerical results show that the coefficient of restitution (COR) and the nondimensional rebounding time (NRT) only depend on the stiffness ratio between the ideal spring(s) and the elastic bar/beam. Collision happens only once for the straight bar impinging on spring, while multiple collisions occur for the straight beam impinging on springs in the cases with large stiffness ratio. Once multiple collisions occur, COR undergoes complicated fluctuation with the increase of stiffness ratio. Approximate analytical solutions (AASs) for COR and NRT under the cases of small stiffness ratio are all derived. Finally, to validate the proposed approach in practical collision problems, the influence of the springs' mass on the collision behavior is demonstrated through numerical simulation.

Saturated Impulse of Elastic-Plastic Beams under Concentrated Pulse Force

Long beam on Winkler-type elastic foundation under a localized rectangular pressure pulse

Dynamic Behavior of Elastic Bars and Beams Impinging on Ideal Springs

Effect of Compressive Axial Load on Forced Transverse Vibrations of a Double-Beam System

Vibration and buckling of a double-beam system under compressive axial loading

Analysis of the Dynamic Response in Blast-Loaded CFRP-Strengthened Metallic Beams

Numerical Study of CFRP-Bonded Pressure Pipes Subject to Impact Load

Pressure–impulse Diagrams for Elastoplastic Beams Subjected to Pulse-Pressure Loading

3-D Dynamic Elastic–plastic FEA for Rotating Disk Indirect Bar–bar Tensile Impact Apparatus: Numerical Analysis for the Generation of Mechanically-Filtered Incident Stress Pulses

Dynamic Response of an Elastic-Plastic Free-Free Beam Subjected to Impact at Any Cross-Section along Its Span

Predicting the Dynamic Response of Elastic-Plastic Beams by Dimensional Analysis

Shock response and finite element analysis of critical components with cantilever beam type under action of a rectangular acceleration pulse

Transient Impact Response Analysis of an Elastic–plastic Beam

Impulse saturation in metal plates under confined blasts

Counter-intuitive Breathing Mode Response of an Elastic–plastic Circular Ring Subjected to Axisymmetric Internal Pressure Pulse

Dynamic Analysis of Structural Columns Subjected to Impulsive Loading

ANALYSIS OF NON-LINEAR PIEZOTHERMOELASTIC LAMINATED BEAMS WITH ELECTRIC AND TEMPERATURE EFFECTS

A Theory of Nonlinear Finite Element Analysis

Study on the Equivalent Impact Method of Long/Short Pulsewidth Loading Based on Cumulative Energy

The Sensitivity Analysis of a Geometrically Unstable Structure under Various Pulse Loading

Discrete Element Method Models of Elastic and Elastoplastic Fiber Assemblies