Abstract:Double-beam systems composed of two interconnected parallel beams have become basic mechanical components of modern engineering structures. Focusing on the asymmetric features in boundary conditions and other structural parameters, this paper studies the buckling and postbuckling behaviors of a double-beam system supported on an elastic foundation. The nonlinear governing differential equations of the system are derived by using the Hamilton's principle, and discretized via the differential quadrature method. Then the pseudo-arc length algorithm is adopted to overcome difficulties of numerical continuation around bifurcation points. Compared with single beam systems, double-beam systems exhibit some peculiarities like multivalued critical buckling loads, in-phase and out-of-phase postbuckling paths. Based on the proposed procedures, these buckling and postbuckling behaviors are investigated in detail. For symmetric boundary cases of the two sub-beams, the multivalued critical buckling loads of the system compose a cluster of critical curves that intersect at a point determined only by the critical loads of single beams. Hence a simple criterion based on single beam critical loads is proposed to quickly estimate whether or not the axial loads would trigger the buckling of the system. However for asymmetric boundary cases, the cluster of critical curves locate in a region that depends on the intrinsic double-beam characteristics, and the criterion is revised accordingly. Also for asymmetric systems, some unique features of the out-of-phase postbuckling paths are detected. It is found that their stabilities are quite different from those of symmetric systems, and that strengthening the system stiffness may even trigger the out-of-phase buckling more easily.

Vibration and buckling of a double-beam system under compressive axial loading

Effect of Compressive Axial Load on Forced Transverse Vibrations of a Double-Beam System

Transverse vibrations of double-walled carbon nanotubes under compressive axial load

Elastic flexural-torsional buckling of thin-walled cantilevers

Elastic Local Buckling and Width-to-Thickness Limits of I-Beams Incorporating Flange–Web Interactions

Elastic Buckling of Inter-Braced Parallel Beam Systems

Buckling of Flexural-Shear Bracing System and Its Braced Steel Frames

Nonlocal Vibration and Biaxial Buckling of Double-Viscoelastic-fgm-nanoplate System with Viscoelastic Pasternak Medium in Between

The elastic buckling of frame columns considering the effect of the shear deformations

Relations Between Buckling & Vibrational Characteristics of Coupled Shear Walls

STABILITY OF DOUBLY SYMMETRIC I-SECTIONAL CANTILEVERS WITH DIFFERENT BOUNDARY CONDITIONS AT TIP

Flexural-torsional Elastic Buckling of Tapered Beams with Simple Support

Critical Load for Shear-Induced Lateral-Distortional Buckling in I-section Steel Beams Considering Flexural Stiffness Ratio

Buckling of Frames Braced by Flexural Bracing

Elastic Stability of Two-Span Continuous Beams under Moving Loads

Analyses of Transverse Vibrations of Axially Pretensioned Viscoelastic Nanobeams with Small Size and Surface Effects

Elastic Flexural-Torsional Buckling of Doubly Symmetric Web-Tapered I-Beams

Buckling and postbuckling behaviors of symmetric/asymmetric double-beam systems

BUCKLING ANALYSIS OF SIMPLY SUPPORTED DELAMINATED BEAMS BASED ON ELASTICITY THEORY

Axial–bending coupling vibration of mass eccentric double-beam system with discrete elastic connections

An Interactive Buckling Theory for Built-Up Beam-Columns and Its Application to Centrally Compressed Built-Up Members