Abstract:The dynamic response of a structure depends on both the structure and the applied load. A pulse approximation method proposed by Youngdahl has been proved to be applicable to stable structures and it has been adopted to deal with arbitrary loading pulse in analyses. However, for the structures possessing unstable load displacement properties, the applicability of pulse approximation method needs to be validated.In our previous theoretical study, by employing the rigid-perfectly plastic idealization, the static and dynamic responses of tensor skin are obtained, revealing its softening (i.e. geometrically unstable) behavior. In the present paper, a similar theoretical approach is employed together with the pulse approximation method to examine the effect of various pulse shapes on the final deflection of the tensor skin. It is found that the final deflections are insensitive to pulse shape, and the differences resulted from different pulses are less than 10%. Hence, the pulse approximation method is also applicable to geometrically unstable structures such as tensor skin.Besides, for various pulse shapes, it is found that the final deflection of tensor skin increases with the total impulse as well as the effective pressure. To achieve a specified deflection, it only requires smaller total impulse for a more intensive impact loading. Furthermore, a damage diagram of tensor skin is constructed in terms of the failure impulse and the effective pressure under different pulse loading. By comparing various pulses with the same impulse level and effective pressure, the explosive pulse is more dangerous than other pulse shapes in producing failure of tensor skin. (C) 2014 Elsevier Ltd. All rights reserved.

Pressure–impulse Diagrams for Elastoplastic Beams Subjected to Pulse-Pressure Loading

Non-dimensional pressure–impulse diagrams for blast-loaded reinforced concrete beam columns referred to different failure modes

Saturated Impulse of Elastic-Plastic Beams under Concentrated Pulse Force

Analysis of the Dynamic Response in Blast-Loaded CFRP-Strengthened Metallic Beams

Pressure–impulse diagrams of RC beams considering fire–blast interaction

The Finite Deformation Approximate Solution and Pressure–impulse Diagram of an Elastic–brittle Rectangular Glass Plate under Pressure Loading

Numerical derivation of P-I diagrams for shallow buried RC box structures

The Sensitivity Analysis of a Geometrically Unstable Structure under Various Pulse Loading

Closed-form P-I diagram based on flextural and shear failure for ptotective wall

Dynamic Analysis of Structural Columns Subjected to Impulsive Loading

Predicting the Dynamic Response of Elastic-Plastic Beams by Dimensional Analysis

3-D Dynamic Elastic–plastic FEA for Rotating Disk Indirect Bar–bar Tensile Impact Apparatus: Numerical Analysis for the Generation of Mechanically-Filtered Incident Stress Pulses

Long beam on Winkler-type elastic foundation under a localized rectangular pressure pulse

Impact responses and residual flexural properties of narrow CFRP laminates

Counter-intuitive Breathing Mode Response of an Elastic–plastic Circular Ring Subjected to Axisymmetric Internal Pressure Pulse

ANALYSIS OF NON-LINEAR PIEZOTHERMOELASTIC LAMINATED BEAMS WITH ELECTRIC AND TEMPERATURE EFFECTS

Spallation Analysis of Concrete Under Pulse Load Based on Peridynamic Theory

Inelastic behavior of bi-symmetric beams with steady axial force and cyclic bending loads

Dynamic Structural Response of Laminated Glass Panels to Blast Loading

A closed-form structural stress-strain relation and implications on plastic design limits in codes and standards

Load regime diagram of a pipe with cyclically plastic bending