Abstract:This paper presents a numerical study examining the dynamic response and resistance mechanism of reinforced concrete (RC) columns strengthened with or without carbon-fiber-reinforced polymer (CFRP) wraps under lateral impact loading by using the software LS-DYNA. First, the information of eight column models was briefly introduced as part of the laboratory experimental program from the literature. Secondly, finite element (FE) models were established in terms of the geometries of impact tests. Then, a detailed comparison between numerical results and experimental results was made, and FE models showed a relatively high simulation accuracy. Subsequently, a series of parametric analyses were carried out with a focus on the effects of axial compression ratio, the boundary condition at the column top, the layer number of CFRP wraps, and the impact velocity and impact height on the dynamic responses of plain and strengthened columns. The results demonstrated that the CFRP retrofit mechanism was not activated during the initial Stage-I when the impact force rapidly increased to the first peak and then decreased to zero. CFRP strengthening came into play in the second stage, Stage-II, and affected the response of the shear force and moment along the column height, as well as had a great influence on the control of shear damage. The dynamic response of RC columns was more sensitive to the impact velocity than to other parameters, regardless of whether CFRP wrapping was applied. The axial compression ratio would have a different influence on the column failure mode if the impact velocity was varied. The variation in impact height and boundary condition at the column top had little influence on the damage mode of strengthened columns.

Analysis of the Dynamic Response in Blast-Loaded CFRP-Strengthened Metallic Beams

Dynamic Behavior of CFRP-Strengthened Reinforced Concrete Beams Without Stirrups under Impact Loading

Impact Testing of Reinforced Concrete Beams Shear-Strengthened with Fiber-Reinforced Polymer Wraps

Experimental study on dynamic behavior of CFRP-to-steel interface

The efficiency of using CFRP as a strengthening technique for reinforced concrete beams subjected to blast loading

Dynamic Response of Fiber-Metal Laminates Sandwich Beams under Uniform Blast Loading

Finite element modeling of FRP retrofitted RC column against blast loading

CFRP Strengthened RC Beams with Pre-Strengthening Non-Uniform Reinforcement Corrosion Subjected to Post-Strengthening Wetting/drying Cycles

Effect of sustaining load level on flexural behavior of RC beams retrofitted with CFRP sheets

Cracking Behavior of Cfrp Laminate-Strengthened Rc Beams with Premechanical and Postmechanical Environmental Damage

Predicting deflection of retrofitted reinforced concrete beams

Blast responses and damage evaluation of CFRP tubular arches

Experimental and theoretical study on the response of the X-frame CFRP sandwich beam under the local impulsive loading

Numerical study of steel–concrete composite beams strengthened by CFRP plates with prestressed unbonded reinforcement system

Analytical Study of Reinforced Concrete Beams Strengthened by FRP Bars Subjected to Impact Loading Conditions

Experimental and theoretical study on flexural behavior of steel-concrete composite beams strengthened by CFRP plates with unbonded retrofit systems

Numerical analysis of prestressed reinforced concrete beam subjected to blast loading

The Strengthening Effect of CFRP for Reinforced Concrete Beam

Research on Dynamic Response of Concrete-Filled Steel Tube Columns Confined with FRP under Blast Loading

The ways and mechanisms of using CFRP materials to strengthen the flexural performance of reinforced concrete beams

Numerical Analysis on Dynamic Response of CFRP-Wrapped RC Columns under Lateral Impact Loading