Abstract:Abstract: The most prevalent and widely used building material in the world is reinforced concrete. The primary building material for the majority of constructions, including buildings, bridges, etc., is reinforced concrete. Because of various factors, some of these buildings or portions of them are failing to perform as designed. The best solution to increase the load carrying capacity and extend the useful life of these inadequate structures is to strengthen them because replacing them would need significant investments and not be an appealing alternative. Even though the effectiveness of other techniques is widely accepted,a new effective and promising technique of strengthening civil engineering structures externally is gaining popularity, where fibre-reinforced polymer (FRP) is used. One of the most popular strengthening methods recently is the use of carbon fibre reinforced polymer (CFRP) to strengthen reinforced concrete beams. It provides a desirable way to improve the shear and flexural strengths of RC beams. The manner in which these composites are bonded to the beam has a significant impact on the behaviour of reinforced concrete beams in shear and flexure. The purpose of this study was to present a three-dimensional nonlinear finite element analysis (FEA) of a reinforced concrete beam (RC beam) reinforced by prestressed carbon fibre plate (CFRP plate). While there are many commercial programmes available for three-dimensional nonlinear FEA, each one has a unique ability to represent complex behaviour of composite materials, such as RC beams strengthened with prestressed CFRP plate and the contact interaction. Because of its reputation for accuracy in simulating the behaviour of a range of materials, including concrete, and its potent contact algorithms, the ABAQUS finite element programme was chosen for this work. Steel reinforcements were modelled as elastic- perfectly plastic materials, while concrete was studied using the concrete damage plasticity (CDP) constitutive model. The CFRP plate was modelled as an entirely elastic substance that breaks under the highest tensile strain. Concrete and steel reinforcement were considered to have a perfect connection, and the behaviour of concrete and CFRP plate was represented using a contact model. The FEA's findings were verified against experiment findings that were published in the literature. In terms of load-deflection behaviour, crack patterns, and mode of failure, the results were compared. The proposed FEA model was able to accurately simulate the behaviour of RC beams strengthened with prestressed CFRP plate based on the validation. To find out the impact of the thickness, width, and length of the CFRP plate, as well as the prestressing levels and steel grades, a parametric research was done. In particular, the strength of the RC beam for the ultimate load was shown to be increased by increasing prestressing of the CFRP plate. However, as prestressing increased, the fracture of the CFRP plate altered the mechanism of failure, preventing the ultimate load from increasing further. The use of higher grade steel improved the ability to support additional weight. Although the general load carrying capability of the CFRP plate was increased by lengthening the plate, it was discovered that strengthening RC beams by 25% of their shear span was sufficient and cost- effective. The load-deflection curve, failure modes, and crack patterns from the experiments are fairly reflected in the FE model.

The ways and mechanisms of using CFRP materials to strengthen the flexural performance of reinforced concrete beams

Ultimate Strength of Reinforced Concrete Beams Retrofitted with Hybrid Bonded Fiber-Reinforced Polymer

Effect of sustaining load level on flexural behavior of RC beams retrofitted with CFRP sheets

An Updated Review on the Effect of CFRP on Flexural Performance of Reinforced Concrete Beams

Study on flexural performance of cracked RC beams retrofitted with CFRP sheets

Flexural performance of FRP-SWSSC-steel composite beams: Experimental and analytical investigation

RESEARCH ON FLEXURAL BEHAVIOR OF RC BEAMS STRENGTHENED WITH BASALT FIBER REINFORCED POLYMER

Reliability-Based Evaluation of Flexural Members Strengthened with Externally Bonded Fiber-Reinforced Polymer Composites

Experimental Study and Numerical Modelling on Flexural and Shear Strengthening of RC Beam with Prestressed FRP Bars

Flexural Strength of Concrete Beam Reinforced with CFRP Bars: A Review

Flexural Performance of RC Beams Strengthened with Polyester FRP Composites

Experimental study on flexural behavior of RC beams strengthened with FRP/SMA composites

Flexural Behavior of Corroded Concrete Beams Strengthened with Carbon Fiber-Reinforced Polymer

Flexural performance of RC beams strengthened with prestressed FRP sheets: Experiments and numerical investigations

Experimental and theoretical study on flexural behavior of steel-concrete composite beams strengthened by CFRP plates with unbonded retrofit systems

Exploring Damage Patterns in CFRP Reinforcements: Insights from Simulation and Experimentation

Flexural and Bond Behavior of Concrete Beams Strengthened with Carbon Fiber-Reinforced Polymer Sheet

Flexural and shear strengthening of reinforced concrete beams using FRP composites: A state of the art

Flexure Strengthening and Analysis Using CFRP Composite and Reactive Powder Concrete

Flexural Performance Study of Basalt-Fiber-Reinforced Polymer Bar Basalt-Fiber-Reinforced Concrete Beams

3D FRP Reinforcement Systems for Concrete Beams: Innovation towards High Performance Concrete Structures