Abstract:Tensor skin refers to a kind of composite sandwich structure comprised of cover ply, tensor ply and carrying ply, which is developed to improve the helicopter’s crashworthiness in water impacts[1]. From the theoretical model, the static critical pressure of tensor skin has the unstable property, that is the initial pressure to make the structure deform is high, but the structural resistance will decrease with increasing deformation[2]. In this study, the dynamic response of tensor skin under water impact pulse is analysed using both FE simulations and the pulse approximation method[3], which has been proved to be suitable for stable structure and popularly adopted in engineering applications. A finite element model is prosed using the commercial finite element code PATRAN/DYTRAN. Three-dimensional analysis is applied in our analysis. Two points at boundary are fixed; the displacement in the out-of-plane direction and the rotations in the inplane directions are constrained. Considering a tensor skin with geometric parameter , unit width and length 2 l  , as shown in Fig. 1. A rectangular pulse and a triangular pulse, that is effective to the rectangular pulse according to the pulse approximation method[3], are applied. It should be emphasized that the triangular pulse is regarded to be most close to the real pulse produced by flat body impacting water[4]. The normalized central deflection u u l  and the kinetic energy curves are given in Fig. 2. Here l is half-length of tensor ply. It found that the central deflection and the kinetic energy of FE simulation are slightly different from theoretical predictions. For the deflection, that is because in the theoretical analysis, the beams are assumed to be rigid segments connected by plastic hinges, while actually, the beams have elastic flexural deformation under pressure loading. For the kinetic energy, there is elastic energy in the FE simulations while it is absent in the theory analysis. However, the difference is quite small; and the theoretical model does capture the major features of the deformation process. The FE results fit well with the theoretical results. Meanwhile, the final deflections of tensor skin under different effective pressures are recorded in Fig. 3. Here t u is the total deflection of tensor ply under different pulse loadings. It is clear that the final deflection of tensor skin under triangular pulse of FE simulation is larger than the others, but the derivations are within 12%.It is concluded that the FE results have very good agreement with the corresponding theoretical predictions[2]. At the same time, it found that the pulse approximation method[3]is suitable in analysing the unstable structures.

The Sensitivity Analysis of a Geometrically Unstable Structure under Various Pulse Loading

Finite element analysis of tensor skin under water impact

Mechanical Analysis of a Type of Hybrid Spatial Structure Composed of Cables, Bars and Beams

Theoretical Analysis of the Static and Dynamic Response of Tensor Skin

Adiabatic Shear Fractures and Fragments of Cylindrical Structures under Internal Explosive Loading

Dynamic Analysis of Structural Columns Subjected to Impulsive Loading

The Equivalent Method for Arbitrary Pulses Loaded on the Elastic-Brittle Panel

Saturated Impulse of Elastic-Plastic Beams under Concentrated Pulse Force

Spallation Analysis of Concrete Under Pulse Load Based on Peridynamic Theory

Verification of a Theoretical Model of Tensor Skin under Water Impact by Considering the Fluid–structure Interaction

Shock response and finite element analysis of critical components with cantilever beam type under action of a rectangular acceleration pulse

Residual Displacement Responses of Structures Subjected to Near-Fault Pulse-Like Ground Motions

Pressure–impulse Diagrams for Elastoplastic Beams Subjected to Pulse-Pressure Loading

Dynamic instability of fiber composite cylindrical shell with metal liner subjected to internal pulse loading

Probabilistic seismic demand model of UBPRC columns conditioned on Pulse-Structure parameters

Dynamic Elastic Response of an Infinite Discrete Multi-Layered Cylindrical Shell Subjected to Uniformly Distributed Pressure Pulse

Dynamic Response of Cantilevers

Dynamic tensile behaviour under impact loading for rocks damaged by static precompression

Study on Mechanism of Strength Deterioration of Rock-Like Specimen and Fracture Damage Deterioration Model Under Pulse Hydraulic Fracturing

Seismic damage analysis due to near‐fault multipulse ground motion

Experimental study on dynamic compression behavior characteristics and stress wave propagation law of rigid-flexible combinations under cyclic bi-directional impact loading