Abstract:The effect of biaxial strain on the superconducting properties of MgB2 monolayer was studied by first-principles calculations. The stability analyses by phonon dispersions show that a biaxial strain of as much as 7% can be applied onto MgB2 without inducing any imaginary frequency. The superconducting property calculations based on the frame of Migdal-Eliashberg theory successfully reproduce the two-gap superconductivity of MgB2. The results show that the tensile biaxial strain can increase the critical temperature of MgB2 by as much as ∼20% while the compressive biaxial strain would decrease the critical temperature by ∼29%. The detailed microscopic mechanism of the biaxial strain effect on the superconducting properties was studied by calculations of electronic structures and phonon dispersions. The increased Tc is a combining result of the increased electron density at the Fermi level and the in-plane boron phonon softening. By means of high-throughput screening of proper substrates, it is found that most of the substrates would result in tensile strain in MgB2 film, some of which can result in tensile strain of higher than 10%, consistent with many experimental works that the MgB2 thin film has increased Tc. The results in this work provide a detailed understanding of the biaxial strain engineering mechanism and demonstrate that biaxial strain engineering can be an effective way of tuning the superconducting properties of MgB2 and other similar materials.

Fabrication of MgB2 Films Via Multilayer Ex-Situ Annealing

Fabrication of MgB 2 Films Via Multilayer Ex-Situ Annealing

Properties of MgB 2 Films Fabricated under Different Conditions by Ex-Situ Annealing of Mg/B Multilayer Precursor

Preparing Ultrathin MgB2 Thin Film by Ex Situ Annealing of Mg-B Precursor Film

Fabrication of superconducting magnesium diboride thin films by electron beam annealing

SUPERCONDUCTING MgB2 FILMS VIA EX-SITU ANNEALING UNDER DIFFERENT Ar PRESSURE PREPARED BY E-BEAM EVAPORATION

Film Fabrication and Electronic Devices of MgB2 Superconductor

Fabrication of Superconducting MgB2 Thin Films by Magnetron co-Sputtering on (001) MgO Substrates

Growth of superconducting MgB2 thin films via postannealing techniques

Study on In Situ annealing superconducting MgB2 films Prepared by pulsed laser deposition

Growth mechanism of superconducting MgB2 films prepared by various methods

Influence of Electron-Beam Annealing Duration on MgB<sub>2</sub> Film Superconductivity

MgB2 Films Prepared by Rapid Annealing Method

Growth of MgB2 Thin Film Fabricated on Mg Substrate by Hybrid Physical-Chemical Vapor Deposition

Hybrid Physical-Chemical Vapor Deposition of Ultrathin Mgb2 Films on Mgo Substrate with High T-C and J(C)

MgB2 Superconducting Films Fabricated on Copper Substrate by Hybrid Physical-Chemical Vapor Deposition

Progress in Depositing MgB2 Films on Stainless Steel Substrate

MgB2 thick film grown on Stainless steel substrate with ductility

MgB2 superconductor thin films on Si and Al2O3 substrates

GROWTH AND PROPERTIES OF SUPERCONDUCTING MgB_2 THIN FILM FABRICATED ON Al_2O_3 SUBSTRATE BY HYBRID PHYSICAL CHEMICAL VAPOR DEPOSITION

Biaxial Strain Engineering on the Superconducting Properties of MgB2 Monolayer