BaTiO3 Dielectric Surface Flashover Triggering Device of Pseudospark Switch

YAO Xue-ling,CHEN Jing-liang,ZENG Zheng-zhong
2008-01-01
Abstract:In order to meet the requirements of the pulsed power technology and pulse test technology to the switchers,a triggered device of BaTiO3 high dielectric surface flashover pseudospark switch(PSS) was designed and its triggering characteristics were investigated.The test results indicate that the high-dielectric triggered device shows excellent electric performances of higher electron emitting capability and fast charge injection within the limits of adjusted parameters like gas pressure and applied voltage.At the pressure 7 Pa,the emitted charge is 1.5 μC within 30 nanosecond,the rise time of injection current is about ten nanosecond,the current injection rate reaches to 1.2×1011 A/s and the number of emitted electrons up to 9.4×1012,these make PSS have small delay time and delay jitter.For the hold-off voltage of PSS 28 kV,the lowest voltage of trigger switch drops to 130 V,the corresponding maximum discharging delay time and delay jitter are respectively 100 ns and 25 ns when the gas pressure is 7 Pa.The minimum discharging delay time and delay jitter are less than 35 ns and 6 ns,respectively when the switch voltage is 28 kV.
What problem does this paper attempt to address?