Abstract:Pulsed power systems can deliver high peak power in a micro/nano-second timescale to various loads in scientific and industrial applications, whose performances are significantly influenced by the pulsed discharge switch. This article presents the development and comprehensive tests of a miniaturized sealed-off pseudospark switch. The structure of double-gap and multi-channel is adopted to achieve the high hold-off voltage and high current capacity. In single pulse tests, the influence of pressure in the switch is analyzed. As the pressure increases, values of multiple parameters decrease, like self-breakdown voltage, trigger delay, and voltage dropping time. In a wide pressure range, trigger jitter is below 3 ns, and the minimum is <1 ns. At low pressure, the transient voltage across two gaps becomes inconsistent, and two types of current quenching are observed, which are related to processes occurring on cathode surface. In repetitive pulse tests, the direct repetitive operation is up to 3.5 kHz while higher repetition rate is limited by the trigger system. In double-pulse tests, the maximum repetition rate can be higher than 8 kHz for 40 kV pulsed voltage. Meanwhile, the insulation recovery speed is higher at lower pressure, and as the time delay between two pulses increases, the second pulse breakdown voltage increases nonlinearly. In high current tests, the switch is also used in metal wire explosion experiments and operates at the condition of 30 kV/40 kA for more than 104 shots without performance degradation. Further lifetime tests point out that the switch can work for >106 shots stably at moderate current. Experiments prove that the designed switch has superior performances including high hold-off voltage (>50 kV), low jitter (<1 ns), high repetition rate (>3.5 kHz), high peak current (>40 kA), long lifetime (>106 shots) and miniaturized size.

The effect of intermediate electrode on pseudo-spark switch performance with high repetition rate

Long Lifetime, Triggered, Spark-Gap Switch For Repetitive Pulsed Power Applications

A Triggered Spark-Gap Switch for High-Repetition Rate High-Voltage Pulse Generation

Design and Performance Analysis of Multi-gap Multi-channel Spark Switch with LCR Triggered Method

High repetition rate, fast current rise, pseudo-spark switch

Multiple-Gap Spark Gap Switch

A Miniaturized Sealed-Off Double-Gap Pseudospark Switch for High Power and High Repetition Rate Pulsed Discharge Applications

Experimental Research of ZnO Surface Flashover Trigger Device of Pseudo-Spark Switch

Influence factors and improvement scheme on the breakdown behavior of pseudospark switch

Investigation on a Novel Multiple-Switch Pulsed Power Technology

Development of P-C Switch with Adjustable Gap

A Repetitive Pulser with Four Spark Gap Switches

A Low-Jitter Self-Triggered Spark-Discharge Pre-Ionization Switch: Primary Research on Its Breakdown Characteristics and Working Mechanisms

Development of a Heavy Duty Pulsed Power Generator with Ten Spark Gap Switches

An Efficient, Repetitive Nanosecond Pulsed Power Generator with Ten Synchronized Spark Gap Switches

Pulsed Corona Generation Using a High-Power Semiconductor Diode Switch

Discharge Electrode Configuration Effects on the Performance of a Plasma Sparker

Comparison of Electrode Effects in High-Pressure and Low-Pressure Gas Discharges Like Spark-Gap and Pseudo-Spark Switch

A reusable planar triggered spark-gap switch batched-fabricated with PCB technology for medium- and low-voltage pulse power systems

Using Self-Triggered Sustaining Pre-Ionization to Obtain Nanosecond Jitter in a MV Pulsed Gas Switch

Breakdown Processes and Mechanisms of Preionized Nitrogen Spark Gaps Under Sub-Microsecond Pulses