Abstract:The development of high-performance integrated circuit chips and the shrinkage of feature sizes according to Moore’s law bring forward continuously the requirements for low dielectric constant (low-k) materials with various excellent properties in the back-end-of-the-line (BEOL) interconnect. Porous SiCOH films prepared by plasma enhanced chemical vapor deposition (PECVD) through a porogen approach are widely applied to industry and extensively studied. Thermal annealing is an important process for fabricating the porous low-k films, which has a great influence on film structure as well as properties. SiCOH films are deposited by PECVD using tetraethoxysilane and limonene as precursors, and annealed at 450 ℃ for 1.5 h under nitrogen atmosphere. The evolutions of film structure and properties during thermal annealing are revealed, and the reaction mechanism for structure change is also proposed. Fourier transform inferred spectroscopy and solid state nuclear magnetic resonance results show that the as-deposited film is an organic-inorganic hybrid film composed of various kinds of Si-O-Si, -CHx, Si-O-CH2CH3, etc. The organic component is removed almost completely during thermal annealing, making a porous film with a Si-O-Si inorganic skeleton. The skeleton is also rearranged at the same time. Deconvolution of the Si-O-Si absorption band of the FTIR spectrum reveals that the cage-like Si-O-Si occupies the major part for both as-deposited and annealed films, while the amount of silicon suboxide Si-O-Si decreases and that of network Si-O-Si increases during thermal annealing, making the film more robust. More C=C and Si-C are formed through chemical reactions between Si-H, -CHx and Si-O-CH2-CH3, and crosslinking is further enhanced. Nitrogen adsorption/desorption isothermal measurement reveals that a large number of micropores with diameter less than 2-3 nm are created during thermal annealing, which is consistent with the removal of organic groups and the existence of cage-like Si-O-Si. As a result, both the refractive index and dielectric constant decrease significantly from 1.476 (λ =630 nm) and 3.45 to 1.365 and 2.60, respectively. Because of the increase of C=C after annealing, extinction coefficient and leakage current density increase. Although there is a shrinkage of 14.7% in film thickness and a reduction of mechanical properties after annealing, the Young’s modulus is still larger than 4 GPa. Considering all kinds of properties, the obtained film appears to be a competitive candidate as inter layer dielectrics in the BEOL interconnect of integrated circuits.

The Effect of Si Surface Nitridation on the Interfacial Structure and Electrical Properties of (la2o3)0.5(sio2)0.5 High-K Gate Dielectric Films

Nitridation of Metalorganic-Chemical-VaporDeposited Al 2 O 3 Gate Dielectrics by NH 3 Annealing

Effect of Nh3 and N-2 Annealing on the Interfacial and Electrical Characteristics of La2o3 Films Grown on Fully Depleted Sige-On-Insulator Substrates

Modulation of Interfacial and Electrical Properties of Hfgdo/Gaas Gate Stacks by Ammonium Sulfide Passivation and Rapid Thermal Annealing

Effects of Ti content and wet-N2 anneal on Ge MOS capacitors with HfTiO gate dielectric

Effect of Post-Annealing on the Physical and Electrical Properties of Laalo3 Gate Dielectrics

Microstructure and Dielectric Properties of La 2 O 3 Doped Amorphous SiO 2 Films As Gate Dielectric Material

Annealing effect on electrical properties of high-k MgZnO film on silicon

Thermal annealing, interface reaction, and lanthanum-based sub-nanometer EOT gate dielectrics

Spectroscopic and Electrical Properties of Atomic Layer Deposition Al2O3 Gate Dielectric on Surface Pretreated Si Substrate

Interface quality modulation, band alignment modification and optimization of electrical properties of HfGdO/Ge gate stacks by nitrogen incorporation

Deposition of SiOxNy films as gate insulator via r.f. reactive sputtering

Interface Optimization and Performance Enhancement of Er2O3-Based MOS Devices by ALD-Derived Al2O3 Passivation Layers and Annealing Treatment

Thermal Stability Of Laalo3/Si Deposited By Laser Molecular-Beam Epitaxy

Impact of Nitrogen Concentration on the Performance of LaAlO3(1−y/2)Ny Films for High-K Gate Dielectric Applications

Structural, Optical and Electrical Properties of High-K ZrO2 Dielectrics on Si Prepared by Plasma Assisted Pulsed Laser Deposition

Effect of Thermal Annealing on the Structure and Properties of Plasma Enhanced Chemical Vapor Deposited Sicoh Film

Study of Interfacial Oxide Layer of LaAlO 3 Gate Dielectrics on Si for Metal–insulator–semiconductor Devices

Study on the thermal stability and electrical properties of the high- k dielectrics (ZrO 2 ) x (SiO 2 ) 1− x

Annealing effect on SiNx/SiO2 superlattice with ultrathin sublayer fabricated using plasma-enhanced atomic layer deposition

Low temperature thermal ALD of a SiNx interfacial diffusion barrier and interface passivation layer on SixGe1- x(001) and SixGe1- x(110)