Metalorganic chemical vapor deposition of silver thin films for future interconnects by direct liquid injection system

L. Gao,P. Härter,Ch. Linsmeier,J. Gstöttner,R. Emling,D. Schmitt-Landsiedel
DOI: https://doi.org/10.1016/j.mssp.2004.09.128
IF: 4.1
2004-01-01
Materials Science in Semiconductor Processing
Abstract:Deposition of Ag films by direct liquid injection-metal organic chemical vapor deposition (DLI-MOCVD) was chosen because this preparation method allows precise control of precursor flow and prevents early decomposition of the precursor as compared to the bubbler-delivery. Silver(I)-2,2-dimethyl-6,6,7,7,8,8,8-heptafluoro-3,5-octanedionato-triethylphosphine [Ag(fod)(PEt3)] as the precursor for Ag CVD was studied, which is liquid at 30°C. Ag films were grown on different substrates of SiO2/Si and TiN/Si. Argon and nitrogen/hydrogen carrier gas was used in a cold wall reactor at a pressure of 50–500Pa with deposition temperature ranging between 220°C and 350°C. Ag films deposited on a TiN/Si diffusion barrier layer have favorable properties over films deposited on SiO2/Si substrate. At lower temperature (220°C), film growth is essentially reaction-limited on SiO2 substrate. Significant dependence of the surface morphology on the deposition conditions exists in our experiments. According to XPS analysis pure Ag films are deposited by DLI-MOCVD at 250°C by using argon as carrier gas.
What problem does this paper attempt to address?