Abstract:The high-temperature oxidation mechanism of silicon carbide (SiC) is crucial for designing thermal protection systems in aircraft. This study explored the oxidative chemical reaction processes and mechanism on SiC surface and interfaces within the temperature range of 300-2300 K by using reactive molecular dynamics simulation. The oxygen impact on the silica (SiOx) growth of the SiC surface was analyzed, which shows a progressive increase of silica thickness. The simulation results indicated that the oxidation process of SiC was a typical passive oxidation mechanism. With the environmental temperature rising and oxygen impact, the increase of oxidation thickness on the SiC surface undergoes three oxidizing reaction processes: little chemical adsorption of oxygen molecules on the initial surface, rapid oxidation of silicon and carbon, and dramatic oxidation of the interface between the oxidation layer and SiC. Additionally, this work studied the mechanism of oxidation thickness growth and chemical diffusion of oxygen. The oxidation rate is weakened according to the oxygen atom diffusion barrier effect of silica repulsion. Moreover, the kinetic parameters were statistically calculated by fitting the growth of Si-O bonds and their reaction rate constants. Subsequently, the activation energy and pre-exponential factors were derived by using the Arrhenius equation to model the chemical reaction kinetics of the thermal oxidation process. The chemical reaction behaviors of the two stages could be concluded as follows: (i) in stage I, the initial oxidation is reaction rate limiting; (ii) in stage II, SiC oxidation is limited by both the oxidation reaction rate and the oxygen diffusion coefficient of the oxidation layer. The activation energy of stage II increased compared with stage I due to the oxygen atoms diffusion barrier between the oxidation layers. This study on the oxidation and ablation mechanism of the SiC surface at the atomic scale would provide insight into understanding thermal oxidation behavior and the design of ceramic materials.

A Mathematical Model for Silicide Oxidation

Oxidation of Refractory Intermetallic Compounds: Kinetics and Thermodynamics

Pre-deposition Growth of Interfacial SiO2 Layer by Low-Oxygen-partial-pressure Oxidation in the Al2O3/4H-SiC MOS Structure

Oxidation of Silicon–germanium Alloys. II. A Mathematical Model

A note on the linear-parabolic law of phase formation

Modeling the Initial Stages of Si(100) Thermal Oxidation: An Ab-initio Approach

AN INTERFACE KINETICS STUDY OF OXIDATION PROCESS OF SILICON

Temperature-Dependent Oxidation Behavior of Silicon Carbide Surface: Reactive Molecular Dynamics Simulations

The kinetics of oxidation: Refinements for silicides, silicon and other materials

Oxidation of Silicon Particles Suspended in a Mullite Matrix with Dual-Mode Vacancy Diffusion of Oxygen

Electro-oxidation of p-silicon in fluoride-containing electrolyte: a physical model for the regime of negative differential resistance

Silicide‐Silicon Interface Degradation during Titanium Silicide/Polysilicon Oxidation

"Anomalous" diffusion in multi-layer silicide systems

Competing Atomic and Molecular Mechanisms of Thermal Oxidation

Temperature dependence mechanism of high-temperature oxidation of transition metal silicide MoSi2

Revisiting single-crystal silicon oxidation: A comprehensive analysis of crystal structural transformation to SiO2

Metal Silicides In Advanced Complementary Metal-Oxide-Semiconductor (Cmos) Technology

Wet and Dry Oxidation of Polycrystalline Si x Ge 1-x Films

Atomic Structural Model of the Si/SiO_2 Interface

Silicide formation by solid-state diffusion in MO/Si multilayer thin films

Two-dimensional modeling of the self-limiting oxidation in silicon and tungsten nanowires