Abstract:A numerical modeling study, based on 3D finite element method (FEM) simulation and 1D analytical solutions, has been carried out to evaluate the capabilities of two ac methods for measuring in-plane thermal conductivity of thin film deposited on the back of a suspended SiNx membrane setup. Two parallel metal strips are present on the top of the dielectric membrane. One strip (S1) serves as both heater and thermometer, while another one (S2) acts as thermometer only. For a modified phase shift (MPS) method, it is crucial to extract the in-plane thermal diffusivity from the phase shift of the temperature oscillation on S2. It was found that the frequency window for carrying out the data fitting became narrower as the in-plane thermal diffusivity of the composite membrane (<math>α∥,C</math>) increased, primarily due to the failure of the semi-infinite width assumption in the low frequency region. To ensure the validity of the method, the upper limit of <math>α∥,C</math> should not exceed ~1.8 × 10−5 m2 s−1 for the specific membrane dimension under consideration (1 × 1 mm2). On the other hand, inspired by a modified Ångström method proposed by Zhu recently, we suggest a new data reduction methodology which takes advantage of the phase shift on both S1 and S2 as well as the amplitude on S1. Based on the simulation results, it is expected that the non-ideality associated with the three "observables" may be at least partially canceled out. Therefore, the frequency window selection for carrying out the data fitting is not sensitive to the magnitude of <math>α∥,C</math> and the upper limit of measurable <math>αC,∥</math> can be further increased with respect to the MPS method. For typical specimen films whose in-plane thermal conductivity ranges from 0.84 W m−1 K−1 to 50 W m−1 K−1, the method proposed here yields a theoretical measurement uncertainty of less than 5%.

Space-Adjustable Non-Contact 3-Electrode Method for Thin Film Measurement

Measurement of Film's Dielectric Parameters with Space-Adjustable Non-Contact 3-Electrode Method

Thin Film Thickness Measurement Using Electron Probe Microanalyzer

Method for Accurate Measurement of Micro-Nano Thin Film Device Resistivity

Virtual instrumentation based automatic thin film resistivity measurement system

Contactless Measurement of Thin Film Conductivity by A Microwave Compact Equipment

Noncontact Thickness Measurement of Metal Films Using Eddy-Current Sensors Immune to Distance Variation

Metal Thickness Measurement System Based on a Double-Coil Eddy-Current Method with Characteristic Ratio Detection.

Electrode size and boundary condition independent measurement of the effective piezoelectric coefficient of thin films

Full field and microregion deformation measurement of thin films using electronic speckle pattern interferometry and array microindentation marker method

In Situ and Real-Time Tensile Testing of Thin Films Using Double-Field-of-view Electronic Speckle Pattern Interferometry

Measuring Technique and Error Analysis of Complex Permittivity of Polymer Films Based on Contact Method

On-Line Measurement Of Tiny Gap Between Arbitrary Surfaces Based On Flexible Eddy Current Sensor Array

Computational Investigation of a Novel Metal Thickness Measurement System with Coaxial Triple-Coil Sensor for Chemical Mechanical Polishing

In-situ measurement of Cu film thickness during the CMP process by using eddy current method alone

Numerical modeling of in-plane thermal conductivity measurement methods based on a suspended membrane setup

Falling liquid film thickness measurement by an optical-electronic method

Thickness Measurement of Metallic Film Based on a High-Frequency Feature of Triple-Coil Electromagnetic Eddy Current Sensor

Measurement Sensitivity and Reliability Analysis of the Space Charge Ellipsometry Detection System

Non-contact measurement of insulating bearing coating thickness based on multi-sensor combination

A New Measurement Method of Dielectric Properties of Cable Stress-Controlled Tube