Abstract:Construction errors are inevitable in real cable-strut tensile structures. Nevertheless, the relevant work, especially the monitoring scheme design work, to control the construction errors is lacking. At present, the monitoring schemes always lay out the monitored members in the places with great internal force or great deformation, do not consider the method to control the construction errors and do not explain the method to lay out the monitored members in fundamental theory. To address this situation, the element length error, which is an important construction error affecting the bearing performance, is considered as the factor variable and the fundamental equation of pre-stress deviation and element length error is derived firstly. Next the methods to express the pre-stress deviation, which are only derived from the active cable length errors or from both the active cable and passive cable length errors, are discussed. After that, based on the condition that the errors can be solved and compensated, the least number of monitored members is determined. Moreover, those members sensitive to cable length deviation of active cables are selected as monitored members. In order to evaluate the effect level caused by passive cable length deviation, two evaluation parameters Δ and ρ are further discussed. Finally, one cable-strut tensile structure example is employed to verify the proposed method and the results of the example studies indicate that the least necessary number of monitored members can be achieved for the accurate solution and compensation of active cable length deviations. Different members have different sensitivities to the change of the length in active cables and those members with great sensitivities can be chosen in prior as monitored members. The evaluation parameters Δ and ρ can be used to analyze the source of errors and to evaluate the error effect level caused by the passive cable length deviation.

A New Measurement Method of Dielectric Properties of Cable Stress-Controlled Tube

Determination of a Monitoring Scheme for Controlling Construction Errors of a Cable-strut Tensile Structure

A New Electrical Resistance Measurement Method of Carbon Fiber-Reinforced Polymer Tubes Based on C⁴D Technique

A New Measuring Method of Tension in Cable and Its Experimental Verification

A Novel Dielectric Loss Measurement Method for Power Cable Based on Oscillating Wave Test Technology

A Modified Measurement Technique Based on the Depolarization Current Used for Power Cable

On-line monitoring method for long distance power cable insulation

An Online Measuring Method for Tangent Delta of Power Cables Based on an Injected Very-Low-Frequency Signal

Open-Ended Coaxial Cable Selection for Measurement of Liquid Dielectric Properties Via the Reflection Method

Measurement Method of Stress in High-Voltage Cable Accessories Based on Ultrasonic Longitudinal Wave Attenuation

The study on prestressed cable stress based on Brillouin-optictime optic fiber sensor

Measurement of Film's Dielectric Parameters with Space-Adjustable Non-Contact 3-Electrode Method

A New Method Of Aging Assessment For Xlpe Cable Insulation Based On Dielectric Response

Online Monitoring of Power Cables Tangent Delta Based on Low-Frequency Signal Injection Method

Research on Conversion of Polarization/depolarization Current and Frequency Domain Spectroscopy for XLPE Cable

Measurement and Analysis on Strains in XLPE Insulation of Power Cables

Assessment of Cable Degradation Using Reflectometry-Based Dielectric Loss Estimation

A new enclosed method for transverse mechanical testing on CICC conductors

Ageing Condition Assessment of DC Cable XLPE Insulation by Tan Δ Measurement at 0.1 Hz Voltage

Space Charge Measurement in LPDE Films under Temperature Gradient and DC Stress

MEASUREMENT AND CALCULATION OF THE PRE-TENSION OF A FLEXIBLE THIN CABLE