Abstract:The large current flowing through transformer windings during external short-circuit events causes strong vibration, and the tank emits multi-frequency sound. This paper investigates the transient acoustic signal theoretically and experimentally and proposes to monitor the winding condition with the spectrum of the acoustic signal. A two-wire model is first built as a basic unit of winding structure. The dynamic equation of the model is constructed based on the principle of least action. The coupling action between the electromagnetic force and the motion of the wires is described as the second-order term of the wire spacing in the equation. The solution shows that the spectrum of the winding vibration contains half power frequency and its multiples in some cases. If the winding is loosened and deformed, the motion space and vibration amplitude would be enlarged, and the natural frequency of winding would decrease. As a result, the vibration spectrum would contain half frequency and its odd multiples. Then, the acoustic signal of a 110-kV transformer is measured on a multiple short-circuit test platform. The acoustic time-frequency spectrums are consistent with the theoretical analysis. The half frequency ratio (HFR) of the acoustic spectrum raises along with the increase of short-circuit times. After 21 short-circuits, the HFR raises obviously, indicating serious deformation of the winding, while no obvious change is found in the short-circuit reactance (SCR). The results prove that the HFR of acoustic signal is a more sensitive indicator than SCR, which can characterize the cumulative process of short-circuit on the winding.

Vibration and Sound Waveform Analysis of 500 Kv Single Phase Power Transformer

Analysis Of Transformer'S Winding Vibration Characteristics Using Hilbert-Huang Transform

Research on Short-Circuit Vibration of Power Transformer

Analysis and Measurement Methods of Transformer Vibration and Noise Characteristics

Vibration Model of Power Transformer under Short-Circuit Condition

Study Of Vibration Sensitive Areas On 500kv Power Transformer Tank

The Vibration Measuring System for Monitoring Core and Winding Condition of Power Transformer

Field Monitoring and Analysis on Vibration and Noise of 500 Kv Electrical Transformer under DC Current Biasing

Online Monitoring Research of Transformer Vibration Based on Labview

Vibration Characteristics of ±800 Kv Converter Transformers Part I: under No-Load Conditions

A Vibration Measurement System for Health Monitoring of Power Transformers

Field Monitoring and Analysis on Vibration and Noise Characteristics of AC Transformer Caused by ± 660kv Yin‐dong DC System

Study on Transformer Tank Vibration Characteristics in the Field and Its Application

On-line Monitoring and Characteristic Analysis of Converter Transformer Vibration

Review of Non-electrical Quantity Monitoring and Fault Diagnosis for Power Transformer on Vibration Analysis Method

Analysis on Sound and Vibration Characteristics of Power Transformer under different Harmonics in Load Condition

Research on Vibration Characteristics and Multi-parameter State Recognition of ± 500 Kv Converter Transformer under Fluctuating Conditions

Study on diagnosis of power transformer winding deformation through vibration signal

Vibration Distribution Characteristics on Oil-Tank Surface of a Single-Phase Transformer

A vibration based condition monitoring system for power transformers

Multi-Frequency Acoustic Signal under Short-Circuit Transient and Its Application on the Condition Monitoring of Transformer Winding