Abstract:Abstract In order to further understand and grasp the impact of load on the vibration and noise characteristics of the transformer, this article analyzes the impact of load factors, power factor, harmonic current, three-phase unbalance and other load factors on transformer vibration and noise from the perspective of transformer vibration mechanism. A 10kV/200kVA three-phase oil-immersed distribution transformer was used as the object. Experiments were conducted to study the changes in the spectrum distribution, noise intensity and A-weighted sound pressure level of the transformer vibration and noise under the influence of different load factors. The results show that: when the frequency increases, the amplitude of the 100Hz fundamental frequency in the vibration noise signal increases, and the noise level increases accordingly; when the power factor increases, the amplitude of the odd frequency components in the vibration noise signal gradually decreases with the increase of the power factor. There is no obvious fluctuation in amplitude except 100Hz. When the harmonic current and the three-phase are unbalanced, the spectral components become complicated and accompanied by a large number of odd-order frequency multiplication components. With the increase of harmonic content, the amplitude of vibration noise signal and A-weighted sound pressure level increase significantly; the degree of unbalance and the occurrence of unbalance have a greater impact on the amplitude of vibration noise signal and A-weighted sound pressure level. The research in this paper provides a reference for the noise suppression of power equipment and the fault diagnosis technology based on vibration and noise signals.

Analysis and Measurement Methods of Transformer Vibration and Noise Characteristics

Analysis Of Transformer'S Winding Vibration Characteristics Using Hilbert-Huang Transform

Research on Short-Circuit Vibration of Power Transformer

Vibration and Sound Waveform Analysis of 500 Kv Single Phase Power Transformer

A Novel Approach to Investigate the Vibration and Noise in Power Transformers

Field Monitoring and Analysis on Vibration and Noise Characteristics of AC Transformer Caused by ± 660kv Yin‐dong DC System

Experimental Analysis of Transformer Core Vibration and Noise under Inter-Harmonic Excitation

The Vibration Measuring System for Monitoring Core and Winding Condition of Power Transformer

Portable Noise Time‐Frequency Characteristic Monitoring System for Environmental Assessment of Power Transformer Rooms

Analysis on Sound and Vibration Characteristics of Power Transformer under different Harmonics in Load Condition

Online Monitoring Research of Transformer Vibration Based on Labview

Electromagnetic vibration noise analysis of transformer windings and core

Research on Vibration Measurement and Characteristics of Converter Transformer Considering the Influence of Harmonics

Review of Non-electrical Quantity Monitoring and Fault Diagnosis for Power Transformer on Vibration Analysis Method

The Influence of Load on the Vibration and Noise Characteristics of Transformer

Design and Implementation of Vibration Characteristics Measurement Platform of Power Transformer

Vibration Characteristics of ±800 Kv Converter Transformers Part I: under No-Load Conditions

On-line Monitoring and Characteristic Analysis of Converter Transformer Vibration

Analysis of Vibration Characteristics and Noise Reduction for 10 kV Oil-Immersed Transformer

Study on Reconstruction of Transformer Factory Noise Signal

The study on measuring point selection of transformer vibration monitoring