Abstract:This article presents a reconfigurable dual-band low noise amplifier (LNA) for 5G millimeter-wave (mmWave) applications in the TSMC 28-nm bulk CMOS process. The reconfigurable LNA is based on a two-stage amplifier design with switchable triple-coupled transformer and capacitor technologies applied to the inter-stage and output matching networks. The switchable triple-coupled transformer can change the self-inductance of the transformer coils by tuning the magnetic flux entering the coils. To suppress the image frequency interference, magnetic–electric hybrid coupling is integrated into the inter-stage matching network, which introduces a transmission zero, resulting in a high image rejection ratio. The measured result shows that the low band has a peak gain of 18.1 dB with a 3-dB bandwidth of 23.8–33.5 GHz, and the high band has a peak gain of 18.9 dB with a 3-dB bandwidth of 34.4–41.4 GHz. The image rejection ratio is better than 32.7 dBc with an intermediate frequency of 8 GHz. The measured NF is better than 3.5 dB at both bands. The IP1dB is -19 to -15.1/-18.5 to -15.2 dBm in the low/high band. The fabricated LNA has a very compact core size of 0.09 mm2, and the total power consumption is only 14 mW.

A 1 V Switchable CMOS LNA for 802.11A/B WLAN Applications

Design of a Fully Integrated Switchable Transistor CMOS LNA for 2.1 / 2.4 GHz Application

A Compact 2.1–39 GHz Self-Biased Low-Noise Amplifier in 65 Nm CMOS Technology

Analysis and Design of Ultra-Wideband Low-Noise Amplifier with Input/Output Bandwidth Optimization and Single-Ended/Differential-Input Reconfigurability.

A compact dual-band direct-conversion CMOS transceiver for 802.11a/b/g WLAN

A 11.2 Mw 48–62 GHz Low Noise Amplifier in 65 Nm CMOS Technology

A dual-band 2.1GHz/5.2GHz LNA for reconfigurable radio

5 GHz LNA based on CHRT 0.18 μm CMOS technology

A High Gain Fully Integrated CMOS LNA for WLAN and Bluetooth Application

A Broadband CMOS LNA for WLAN Applications

A Fully Integrated Dual-Band Low Noise Amplifier for IEEE 802.11 & Hiperlan Applications

A 0.9/1.8/2.4Ghz-Reconfigurable LNA with Inductor and Capacitor Tuning for IoT Application in 65nm CMOS

A Compact Millimeter-Wave Reconfigurable Dual-Band LNA With Image-Rejection in 28-nm Bulk CMOS for 5G Applications

A Low-Power Monolithic Reconfigurable Direct-Conversion Receiver RF Front-End for 802.11a/b/g Applications

A dual band CMOS two-stage variable gain low noise amplifier

A Switchable Dual-Band LNA with Simultaneous Noise and Input Impedance Matching for GSM/TD-SCDMA Applications

A low-power monolithic reconfigurable direct-conversion receiver RF front-end for 802.1 la/b/g applications

A 2.8–10-GHz CMOS Current Reuse Cascaded Linearity Improving Ultra-Wideband Low-Noise Amplifier

A1V 6mW inductorless wideband LNA in 0.13μm RF CMOS

A 0.1-4Ghz Reconfigurable Multi-band CMOS LNA for SDR Applications

A 28/39 GHz Tri-Mode Frequency-Reconfigurable LNA for Multiband 5G Communications