Abstract:Two inductorless low-power differential low-noise amplifiers (LNAs) are designed for multiband wireless communication applications. Both LNAs are based on the combination of common-gate (CG) and shunt feedback topologies. In the first LNA, the cross-coupled push-pull structure with separated bias for nMOS and pMOS CG transistors is utilized to realize gm enhancement, partial noise cancellation, and bandwidth extension. In the second LNA, cascode transistors are utilized on the basis of the first topology to alleviate the Miller effect and to construct current steering structures, so as to extend the bandwidth. For both LNAs, in-depth analysis is given, and methods for sizing and biasing optimization under power constraint are proposed to obtain good overall performance tradeoffs while maintaining low-power consumption. The prototypes are implemented in 65-nm low-power CMOS technology. The first LNA achieves a gain of 21.2 dB, a noise figure (NF) of 3-3.5 dB over the 3-dB bandwidth of 200 MHz to 2.7 GHz and an IIP3 of -2 dBm at 1.1 GHz. It consumes 0.96 mW from 1.2-V supply. The second LNA exhibits a gain of 21.2 dB, an NF of 2.8-4 dB over the 3-dB bandwidth of 100 MHz to 4.3 GHz. It consumes 2 mW from 1.2-V supply. Each LNA occupies an area of 0.05 mm(2).

A1V 6mW inductorless wideband LNA in 0.13μm RF CMOS

Analysis And Design Of Inductorless Wideband Low-Noise Amplifier With Noise Cancellation Technique

A Wideband Inductorless LNA with Local Feedback and Noise Cancelling for Low-Power Low-Voltage Applications

3-10 GHz self-biased resistive-feedback lna with inductive source degeneration

A Compact 2.1–39 GHz Self-Biased Low-Noise Amplifier in 65 Nm CMOS Technology

Analysis and Design of Ultra-Wideband Low-Noise Amplifier with Input/Output Bandwidth Optimization and Single-Ended/Differential-Input Reconfigurability.

Design of a Broadband Ka-band MMIC LNA Using Deep Negative Feedback Loop.

Low Power 0.18µm CMOS Ultra Wideband Inductor-Less LNA Design for UWB Receiver

Low Power 0.18&#x00b5;m CMOS Ultra Wideband Inductor-Less LNA Design for UWB Receiver

A 0.03-3Ghz Inductorless Wideband Low Noise Amplifier in 65nm CMOS

A CMOS 0.5&#x2013;10.6 GHz Inductor Feedback Low Noise Amplifier for Multi-Standard Application

A wideband inductorless LNA exploiting three-stage feedback and thermal noise canceling

An Inductorless Wideband Common-Gate Lna with Dual Capacitor Cross-Coupled Feedback and Negative Impedance Techniques

An inductorless wideband low noise amplifier with current reuse and linearity enhancement

A resistive-feedback LNA in 65 nm CMOS with a gate inductor for bandwidth extension.

Wideband Inductorless Low-Power LNAs with Gm Enhancement and Noise-Cancellation.

A fully-integrated low-power 3.1-10.6GHz UWB LNA in 0.18μm CMOS

A dual band CMOS two-stage variable gain low noise amplifier

A Low Power Inductorless Wideband LNA With G m Enhancement and Noise Cancellation

A Low Power High Gain UWB LNA in 0.18-Μm CMOS

3–10 GHz, 6.54‐mw CMOS Ultrawideband Low‐noise Amplifier Using a Hybrid Structure

A1V 6mW inductorless wideband LNA in 0.13μm RF CMOS

Analysis And Design Of Inductorless Wideband Low-Noise Amplifier With Noise Cancellation Technique

A Wideband Inductorless LNA with Local Feedback and Noise Cancelling for Low-Power Low-Voltage Applications

3-10 GHz self-biased resistive-feedback lna with inductive source degeneration

A Compact 2.1–39 GHz Self-Biased Low-Noise Amplifier in 65 Nm CMOS Technology

Analysis and Design of Ultra-Wideband Low-Noise Amplifier with Input/Output Bandwidth Optimization and Single-Ended/Differential-Input Reconfigurability.

Design of a Broadband Ka-band MMIC LNA Using Deep Negative Feedback Loop.

Low Power 0.18µm CMOS Ultra Wideband Inductor-Less LNA Design for UWB Receiver

Low Power 0.18&amp;#x00b5;m CMOS Ultra Wideband Inductor-Less LNA Design for UWB Receiver

A 0.03-3Ghz Inductorless Wideband Low Noise Amplifier in 65nm CMOS

A CMOS 0.5&amp;#x2013;10.6 GHz Inductor Feedback Low Noise Amplifier for Multi-Standard Application

A wideband inductorless LNA exploiting three-stage feedback and thermal noise canceling

An Inductorless Wideband Common-Gate Lna with Dual Capacitor Cross-Coupled Feedback and Negative Impedance Techniques

An inductorless wideband low noise amplifier with current reuse and linearity enhancement

A resistive-feedback LNA in 65 nm CMOS with a gate inductor for bandwidth extension.

Wideband Inductorless Low-Power LNAs with Gm Enhancement and Noise-Cancellation.

A fully-integrated low-power 3.1-10.6GHz UWB LNA in 0.18μm CMOS

A dual band CMOS two-stage variable gain low noise amplifier

A Low Power Inductorless Wideband LNA With G m Enhancement and Noise Cancellation

A Low Power High Gain UWB LNA in 0.18-Μm CMOS

3–10 GHz, 6.54‐mw CMOS Ultrawideband Low‐noise Amplifier Using a Hybrid Structure

Low Power 0.18µm CMOS Ultra Wideband Inductor-Less LNA Design for UWB Receiver

A CMOS 0.5–10.6 GHz Inductor Feedback Low Noise Amplifier for Multi-Standard Application