Abstract:Two inductorless low-power differential low-noise amplifiers (LNAs) are designed for multiband wireless communication applications. Both LNAs are based on the combination of common-gate (CG) and shunt feedback topologies. In the first LNA, the cross-coupled push-pull structure with separated bias for nMOS and pMOS CG transistors is utilized to realize gm enhancement, partial noise cancellation, and bandwidth extension. In the second LNA, cascode transistors are utilized on the basis of the first topology to alleviate the Miller effect and to construct current steering structures, so as to extend the bandwidth. For both LNAs, in-depth analysis is given, and methods for sizing and biasing optimization under power constraint are proposed to obtain good overall performance tradeoffs while maintaining low-power consumption. The prototypes are implemented in 65-nm low-power CMOS technology. The first LNA achieves a gain of 21.2 dB, a noise figure (NF) of 3-3.5 dB over the 3-dB bandwidth of 200 MHz to 2.7 GHz and an IIP3 of -2 dBm at 1.1 GHz. It consumes 0.96 mW from 1.2-V supply. The second LNA exhibits a gain of 21.2 dB, an NF of 2.8-4 dB over the 3-dB bandwidth of 100 MHz to 4.3 GHz. It consumes 2 mW from 1.2-V supply. Each LNA occupies an area of 0.05 mm(2).

An inductorless wideband low noise amplifier with current reuse and linearity enhancement

Analysis And Design Of Inductorless Wideband Low-Noise Amplifier With Noise Cancellation Technique

Analysis and Design of Ultra-Wideband Low-Noise Amplifier with Input/Output Bandwidth Optimization and Single-Ended/Differential-Input Reconfigurability.

A Highly Linear 2.4GHz Low Noise Amplifier

A Compact 2.1–39 GHz Self-Biased Low-Noise Amplifier in 65 Nm CMOS Technology

3-10 GHz self-biased resistive-feedback lna with inductive source degeneration

Ultralow Power E-Band Low-Noise Amplifier with Three-Stacked Current-Sharing Amplification Stages in 28-Nm CMOS

A 0.061-Mm² 1–11-Ghz Noise-Canceling Low-Noise Amplifier Employing Active Feedforward with Simultaneous Current and Noise Reduction

A Wideband Inductorless LNA with Local Feedback and Noise Cancelling for Low-Power Low-Voltage Applications

A BiCMOS Implementation of Noise Canceling Low Noise Amplifier for Wideband Applications

A Gm-boosted and current peaking wideband merged LNA and mixer

A 2.8–10-GHz CMOS Current Reuse Cascaded Linearity Improving Ultra-Wideband Low-Noise Amplifier

A 0.0081mm2 0.15–5.9-Ghz Low Noise Amplifier with Noise Cancelling and Current Reuse Techniques

An Inductor-Less Highly Linear LNA with Noise Cancelling and Current Reusing for 3–5 GHz Low-Power UWB Receivers

Wideband Inductorless Low-Power LNAs with Gm Enhancement and Noise-Cancellation.

A1V 6mW inductorless wideband LNA in 0.13μm RF CMOS

Inductorless CMOS Low Noise Amplifier for Multiband Application in 0.1–1.2 GHz

A 0.03-3Ghz Inductorless Wideband Low Noise Amplifier in 65nm CMOS

A wideband inductorless LNA exploiting three-stage feedback and thermal noise canceling

A CMOS 0.5&#x2013;10.6 GHz Inductor Feedback Low Noise Amplifier for Multi-Standard Application

A Low Power Inductorless Wideband LNA With G m Enhancement and Noise Cancellation