Abstract:Two inductorless low-power differential low-noise amplifiers (LNAs) are designed for multiband wireless communication applications. Both LNAs are based on the combination of common-gate (CG) and shunt feedback topologies. In the first LNA, the cross-coupled push-pull structure with separated bias for nMOS and pMOS CG transistors is utilized to realize gm enhancement, partial noise cancellation, and bandwidth extension. In the second LNA, cascode transistors are utilized on the basis of the first topology to alleviate the Miller effect and to construct current steering structures, so as to extend the bandwidth. For both LNAs, in-depth analysis is given, and methods for sizing and biasing optimization under power constraint are proposed to obtain good overall performance tradeoffs while maintaining low-power consumption. The prototypes are implemented in 65-nm low-power CMOS technology. The first LNA achieves a gain of 21.2 dB, a noise figure (NF) of 3-3.5 dB over the 3-dB bandwidth of 200 MHz to 2.7 GHz and an IIP3 of -2 dBm at 1.1 GHz. It consumes 0.96 mW from 1.2-V supply. The second LNA exhibits a gain of 21.2 dB, an NF of 2.8-4 dB over the 3-dB bandwidth of 100 MHz to 4.3 GHz. It consumes 2 mW from 1.2-V supply. Each LNA occupies an area of 0.05 mm(2).

A High Gain Fully Integrated CMOS LNA for WLAN and Bluetooth Application

A Compact 2.1–39 GHz Self-Biased Low-Noise Amplifier in 65 Nm CMOS Technology

Analysis and Design of Ultra-Wideband Low-Noise Amplifier with Input/Output Bandwidth Optimization and Single-Ended/Differential-Input Reconfigurability.

A 11.2 Mw 48–62 GHz Low Noise Amplifier in 65 Nm CMOS Technology

3-10 GHz self-biased resistive-feedback lna with inductive source degeneration

A Highly Linear 2.4GHz Low Noise Amplifier

A Fully Integrated Dual‐band Low‐noise Amplifier for Bluetooth and Wireless LAN Applications

A Broadband CMOS LNA for WLAN Applications

A 0.18-Μm CMOS LNAs with Sub-2 Db NF and Low Power for Bluetooth Applications

A Low Power High Gain UWB LNA in 0.18-Μm CMOS

5 GHz LNA based on CHRT 0.18 μm CMOS technology

A fully-integrated low-power 3.1-10.6GHz UWB LNA in 0.18μm CMOS

A dual band CMOS two-stage variable gain low noise amplifier

A Novel CMOS Low-Noise Amplifier Design for 3.1- to 10.6-Ghz Ultra-Wide-band Wireless Receivers

Wideband Inductorless Low-Power LNAs with Gm Enhancement and Noise-Cancellation.

A fully integrated 0.18-/spl mu/m CMOS low noise amplifier for 2.4-GHz applications

A Fully Integrated Dual-Band Low Noise Amplifier for IEEE 802.11 & Hiperlan Applications

A 21-to-41-GHz High-Gain Low Noise Amplifier With Triple-Coupled Technique for Multiband Wireless Applications

3–10 GHz, 6.54‐mw CMOS Ultrawideband Low‐noise Amplifier Using a Hybrid Structure

A dual-band 2.1GHz/5.2GHz LNA for reconfigurable radio

A W-Band Low Noise Amplifier with High Gain and Low Noise Figure in 65-Nm CMOS