Abstract:Two inductorless low-power differential low-noise amplifiers (LNAs) are designed for multiband wireless communication applications. Both LNAs are based on the combination of common-gate (CG) and shunt feedback topologies. In the first LNA, the cross-coupled push-pull structure with separated bias for nMOS and pMOS CG transistors is utilized to realize gm enhancement, partial noise cancellation, and bandwidth extension. In the second LNA, cascode transistors are utilized on the basis of the first topology to alleviate the Miller effect and to construct current steering structures, so as to extend the bandwidth. For both LNAs, in-depth analysis is given, and methods for sizing and biasing optimization under power constraint are proposed to obtain good overall performance tradeoffs while maintaining low-power consumption. The prototypes are implemented in 65-nm low-power CMOS technology. The first LNA achieves a gain of 21.2 dB, a noise figure (NF) of 3-3.5 dB over the 3-dB bandwidth of 200 MHz to 2.7 GHz and an IIP3 of -2 dBm at 1.1 GHz. It consumes 0.96 mW from 1.2-V supply. The second LNA exhibits a gain of 21.2 dB, an NF of 2.8-4 dB over the 3-dB bandwidth of 100 MHz to 4.3 GHz. It consumes 2 mW from 1.2-V supply. Each LNA occupies an area of 0.05 mm(2).

A 0.18-Μm CMOS LNAs with Sub-2 Db NF and Low Power for Bluetooth Applications

A Sub-GHz Low-Power Receiver Employing Resistive-Feedback-Tuned LNA with 2.1-Db NF and 106-Db Gain Tuning Range

A Compact 2.1–39 GHz Self-Biased Low-Noise Amplifier in 65 Nm CMOS Technology

A Sub-GHz CMOS Low-IF Receiver for Lot Applications

A Fully Integrated Dual‐band Low‐noise Amplifier for Bluetooth and Wireless LAN Applications

A Highly Linear 2.4GHz Low Noise Amplifier

Analysis and Design of Wideband Low Noise Amplifier with Digital Control

Analysis and Design of Ultra-Wideband Low-Noise Amplifier with Input/Output Bandwidth Optimization and Single-Ended/Differential-Input Reconfigurability.

A 11.2 Mw 48–62 GHz Low Noise Amplifier in 65 Nm CMOS Technology

A High Gain Fully Integrated CMOS LNA for WLAN and Bluetooth Application

5 GHz LNA based on CHRT 0.18 μm CMOS technology

A fully integrated 0.18-/spl mu/m CMOS low noise amplifier for 2.4-GHz applications

A Fully Integrated 0.18-Mu M Cmos Low Noise Amplifier for 2.4-Ghz Applications

A dual band CMOS two-stage variable gain low noise amplifier

A 0.9V 0.1-4Ghz LNTA in 28-Nm CMOS Achieving +11.3dbm IIP3 with Self-loaded Linearization Technique.

Wideband Inductorless Low-Power LNAs with Gm Enhancement and Noise-Cancellation.

Design and Test of a CMOS Low Noise Amplifier in Bluetooth Transceiver

Millimeter-Wave Low-Noise Amplifier Design in 28-nm Low-Power Digital CMOS

Low Noise Amplifier Design and Performance Analysis of RF Front-End for Narrow Band Receivers

Dual-Band CMOS Low-Noise Amplifier

A 0.18 Mu M Cmos Ultra-Wideband Low-Noise Amplifier With High Iip3