Abstract:Two inductorless low-power differential low-noise amplifiers (LNAs) are designed for multiband wireless communication applications. Both LNAs are based on the combination of common-gate (CG) and shunt feedback topologies. In the first LNA, the cross-coupled push-pull structure with separated bias for nMOS and pMOS CG transistors is utilized to realize gm enhancement, partial noise cancellation, and bandwidth extension. In the second LNA, cascode transistors are utilized on the basis of the first topology to alleviate the Miller effect and to construct current steering structures, so as to extend the bandwidth. For both LNAs, in-depth analysis is given, and methods for sizing and biasing optimization under power constraint are proposed to obtain good overall performance tradeoffs while maintaining low-power consumption. The prototypes are implemented in 65-nm low-power CMOS technology. The first LNA achieves a gain of 21.2 dB, a noise figure (NF) of 3-3.5 dB over the 3-dB bandwidth of 200 MHz to 2.7 GHz and an IIP3 of -2 dBm at 1.1 GHz. It consumes 0.96 mW from 1.2-V supply. The second LNA exhibits a gain of 21.2 dB, an NF of 2.8-4 dB over the 3-dB bandwidth of 100 MHz to 4.3 GHz. It consumes 2 mW from 1.2-V supply. Each LNA occupies an area of 0.05 mm(2).

A 0.9/1.8/2.4Ghz-Reconfigurable LNA with Inductor and Capacitor Tuning for IoT Application in 65nm CMOS

A Compact 2.1–39 GHz Self-Biased Low-Noise Amplifier in 65 Nm CMOS Technology

3-10 GHz self-biased resistive-feedback lna with inductive source degeneration

Analysis and Design of Ultra-Wideband Low-Noise Amplifier with Input/Output Bandwidth Optimization and Single-Ended/Differential-Input Reconfigurability.

Analysis And Design Of Inductorless Wideband Low-Noise Amplifier With Noise Cancellation Technique

A Sub-GHz Low-Power Receiver Employing Resistive-Feedback-Tuned LNA with 2.1-Db NF and 106-Db Gain Tuning Range

0.9–10GHz low noise amplifier with capacitive cross coupling

A 0.1-4Ghz Reconfigurable Multi-band CMOS LNA for SDR Applications

A 1.0–5.0ghz Tunable LNA with Automatic Frequency Calibration in 65 Nm CMOS

A dual-band 2.1GHz/5.2GHz LNA for reconfigurable radio

Inductorless CMOS Low Noise Amplifier for Multiband Application in 0.1–1.2 GHz

A 0.03-3Ghz Inductorless Wideband Low Noise Amplifier in 65nm CMOS

28 GHz Compact LNAs with 1.9 Db NF Using Folded Three-Coil Transformer and Dual-Feedforward Techniques in 65nm CMOS

A 54.4–90 GHz Low-Noise Amplifier in 65-nm CMOS

A Compact Millimeter-Wave Reconfigurable Dual-Band LNA With Image-Rejection in 28-nm Bulk CMOS for 5G Applications

A dual band CMOS two-stage variable gain low noise amplifier

Design of a Fully Integrated Switchable Transistor CMOS LNA for 2.1 / 2.4 GHz Application

A 28/39 GHz Tri-Mode Frequency-Reconfigurable LNA for Multiband 5G Communications

A Wideband Inductorless LNA with Local Feedback and Noise Cancelling for Low-Power Low-Voltage Applications

A CMOS 0.5&#x2013;10.6 GHz Inductor Feedback Low Noise Amplifier for Multi-Standard Application

Wideband Inductorless Low-Power LNAs with Gm Enhancement and Noise-Cancellation.