Abstract:Nanostructure reinforced nitride ceramics play an important role in the family of structural ceramics. In this study, large scale of one-dimensional (1D) beta-sialon nanostructures and beta-sialon-beta-Si3N4 composite powders were synthesized simultaneously via a reduction nitridation process by using powders of silicon, aluminum, and silica as raw materials. X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM/HRTEM), Fourier-transform infrared spectroscopy (FT-IR) and energy dispersive x-ray spectroscopy (EDS) were used to characterize the phase composition, morphology, and microstructure of the as-obtained products. As a result, large scale of 1D beta-sialon nanostructures can be prepared at 1600 degrees C. The diameter of the as-prepared nanowires in the range of 80 to 170 nm can be tailored by the addition of aluminum. The growth of 1D beta-sialon nanostructures is achieved by a vapor-solid (VS) mechanism. Photoluminescence (PL) of the 1D beta-sialon nanostructures was characterized which exhibit violet/blue emission peaks, making it have the potential to be applied in optoelectronic nanodevices. Besides, nitride ceramic composite powders including beta-Si3N4 and beta-sialon with in situ formed beta-sialon nanowires were also achieved. The phase transformation behavior and the thermodynamical analysis of the ceramic composite powders were also studied by characterizing the phase composition of the products synthesized at different temperature. The as-grown beta-sialon nanowires and the composite powders have great potential to be applied in nanostructure reinforced structural ceramics.

Preparation and Microstructure Evolution of Diboride Ultrafine Powder by Sol–gel and Microwave Carbothermal Reduction Method

Optimization of Microstructure to Improve Si3n4 Ceramics with Thermal Conductivity and Mechanical Properties: Effect of Si and Α-Si3n4 Powder Composition

Nano Β-Sialon Powder Synthesized by Carbothermal Reduction and Nitridation of Ultrafine Al2O3-SiO2 Mixture Employing Sol-Gel Techniques

Preparation and Oxidation of Bauxite-Based Β-Sialon-bonded SiC Composite

Oxidation Behavior of Β-Sialon Powders Fabricated by Combustion Synthesis

The Preparation of Β-Sialon Powder from High-Alumina Fly Ash: an Experimental Study

Carbothermal Preparation of Ultra-Fine TiB2 Powders Using Solution-Derived Precursors Via Sol-Gel Method

Ultrafine ZrB2 Ceramic Powders Prepared by a Sol–Gel Method Synergized with a Carbothermic Reaction and Their Improved Sintering Performance

Sintering and Composition of a Powder Mixture of Fine Al2O3 and Beta-Sialon Composite Made from Bauxite

Study on Synthesizing Diphase Sialon from Lower Al2O3 Bauxite by Carbothermal Reduction-Nitridation

Synthesis of Ultra-Fine and High-Pure Zirconium Diboride Powders Using Solution-Based Processing

Preparation of Β-Sialon from Fly Ash by Carbothermal Reduction-Nitridation Reaction

Microstructures and oxidation mechanisms of (Zr0.2Hf0.2Ta0.2Nb0.2Ti0.2)B2 high-entropy ceramic

Growth mechanism and synchronous synthesis of 1D beta-sialon nanostructures and beta-sialon-Si3N4 composite powders by a process of reduction nitridation

Preparation and Characterization of Β-Sialon Ceramics from High Aluminium Fly Ash Via Carbothermal Reduction-Nitridation

Preparation of β-Sialon /SiC composite powder by carbothermal reaction of coal-mine schist

Phase Behavior Analysis of Low-Grade Bauxite and Rutile by Carbothermal Reduction-Nitridation

Microstructure and high-temperature properties of SI-B-C-N MA-powders and ceramic

Carbothermal Reduction Synthesis Of Zirconium Diboride Powders Assisted By Microwave

Preparation And Formation Mechanism Of Elongated (Ca,Dy)-Alpha-Sialon Powder Via Carbothermal Reduction And Nitridation

Synthesis and characterization of nano-sized Si-B-O-N ceramic powders