Abstract:One of the main features of SiBCN‐based ceramics is their high temperature stability with respect to crystallization and decomposition in protective atmospheres. High temperature studies of a polyborosilazane in air up to 1500 °C show that the formation of coexisting nano‐quartz and amorphous B2O3 is suitable for the application as adhesive for bonding advanced ceramics. Spectroscopic and X‐ray studies combined with thermal analysis clearly demonstrate the strong influence of the presence of air on the cross‐linking and pyrolysis behavior and, thus, finally on the ceramization process of the applied SiBCN preceramic polymer. Accordingly, cross‐linking and subsequent pyrolysis of the SiBCN‐precursor up to 1600 °C in air result in the formation of a network structure comprised of SiO2 and B2O3 with minor amounts of residual amorphous SiBCN. In contrast to the polymer‐to‐ceramic transformation of the used polyborosilazane in protective atmospheres like Ar or N2, the ceramic yield at 1400 °C is high and amounts 85.6 wt%. Furthermore, the elemental composition of the resulting SiBCNO does not change significantly at T > 1200 °C even after heat‐treatment at 1600 °C indicating the high temperature stability of the resulting SiBCNO material. Cross‐linking and pyrolysis of the SiBCN‐precursor in air up to 1600 °C forms a network structure comprised of SiO2 and B2O3. The elemental composition of the resulting SiBCNO does not change significantly from 1200 to 1600 °C, indicating the high temperature stability of the resulting SiBCNO material.

Synthesis and characterization of nano-sized Si-B-O-N ceramic powders

Preparation And Characterization Of Polymer-Derived Sibonc Bulk Ceramics By Polymer-Drived Precursor Method

Preparation of Amorphous Si-B-C-N Powders and Nano-Sized Ceramics

Polyborosilazanes with Controllable B/N Ratio for Si–B–C–N Ceramics

Synthesis and Characterization of High-Purity, High-Entropy Diboride Ceramic Powders by a Liquid Phase Method

Preparation and Characterization of Nanocrystalline (1−x)bisco3–xpbtio3 Powder

Sol-Gel-Derived Siboc Ceramics with Highly Graphitized Free Carbon

Preparation of Amorphous SiOC Ceramic Powders through Precursor Polymer Pyrolysis

High-pressure Synthesis, Mechanical Properties and Oxidation Behavior of Advanced Boron-Containing Α/β-Si 3N 4/si Ceramics Using Polymer-Derived Amorphous SiBN Ceramics

Densi Cation and Crystallisation Behaviour of Si–B–O–N Ceramics Prepared by Hot Pressing with Organic Precursors

High Boron Content and Soluble Polyborosilazanes to Amorphous SiBCN Ceramics

Preparation and Properties of Nano BaNb2O6-Al2O3 Ceramic Composites

Pseudo low-temperature sintering effect and microstructure evolution of SiBCO ceramics

Polyborosilazane with Broadly Tunable Boron Content for SiBCN Ceramics

Polyborosilazane‐Derived High Temperature Resistant SiBCNO

Fabrication of Practically Pure Si2N2O Ceramic with High Performance from Amorphous BN Surface Modified Nano-Sized Si3N4 Powders

Low temperature preparation of nanocrystalline Sr0.5Ba 0.5Nb2O6 powders using an aqueous organic gel route

Synthesis and Characterization of BaCe<sub>0.8</sub>Y<sub>0.2</sub>O<sub>2.9</sub> Nanopowder by Sol-Gel Auto-Ignited Method

Synthesis of Ceramic Nanocomposite Powders with in Situ Formation of Nanowires/Nanobelts

Variations of Microstructure and Mechanical Properties of Si-B-O-N Ceramics with Sintering Temperatures

Phase evolution and oxidation resistance of Si3N4/HfB2/HfB C N1–– ceramic nanocomposites prepared from tailored preceramic polymers