Abstract:To ascertain the influence of SiC nanowires on sintering kinetics of heterophase ceramics, two composite powders (TaSi2-TaC-SiC and TaSi2-TaC-SiC-SiCnanowire) are fabricated by mechanically activated combustion synthesis of Ta-Si-C and Ta-Si-C-(C2F4) reactive mixtures. Remarkable compressibility is achieved for the TaSi2-TaC-SiC-SiCnanowire composition (green density up to 84% as compared with 45.2% achieved for TaSi2-SiC-TaC) which is attributed to the lubricating effect of residual adsorbed fluorinated carbon (most likely C4F8). The outcomes of pressureless sintering of TaSi2-TaC-SiC and TaSi2-TaC-SiC-SiCnanowire compositions are vastly different; the former experiences no significant densification or grain growth and does not attain structural integrity, whereas the latter achieves relative density up to 93% and hardness up to 11 GPa. The SiC nanowires are not retained in consolidated ceramics, but instead, act as a sintering aid and promote densification and grain growth. Sintering mechanisms of TaSi2-TaC-SiC and TaSi2-TaC-SiC-SiCnanowire powders are analyzed using thermodynamic and ab initio grand potential calculations, as well as the analysis of grain size versus relative density relations. In the case of solid-state sintering, the densification and grain growth in heterophase non-oxide ceramics are governed by the same mechanisms as previously investigated single-phase oxides. The presence of SiC nanowires enhances grain-boundary related diffusion processes due to the high specific surface and aspect ratio of the nanowires. At 1500 °C, where the formation of the transient Si-based liquid phase is thermodynamically viable, only the SiC nanowire-containing composition demonstrated the intense grain coarsening and densification associated with liquid-assisted sintering. This effect can be attributed both to the presence of SiC nanowires and purification of residual oxide impurities due to C2F4-activated combustion synthesis employed for the in situ formation of SiC nanowires.

Synthesis of Ceramic Nanocomposite Powders with in Situ Formation of Nanowires/Nanobelts

In-situ fabrication of ZrB2-ZrC-SiCnws hybrid nanopowders with tuneable morphology SiCnws

Preparation of ZrB2-ZrC-SiC-ZrO2 nanopowders with in-situ grown homogeneously dispersed SiC nanowires

Nanostructured Hybrid Carbon Nanotube/UltraHigh‐Temperature Ceramic Heterostructures: Microstructure Evolution and Forming Mechanism

Preparation and mechanical behaviors of multiscale SiC nanowires/carbon fiber reinforced silicon oxycarbide ceramic composites

Morphology Control of Si-Based Nanostructures by Catalyst-Assisted Pyrolysis of Preceramic Precursors

Tailoring crystal structure of high-entropy carbides in Si-based ceramic nanocomposites through precursor engineering

Superparamagnetic Silicon Carbonitride Ceramic Fibers Through In Situ Generation of Iron Silicide Nanoparticles During Pyrolysis of an Iron-Modified Polysilazane

Synthesis of nanocrystalline silicon carbide powders

Catalyst-Assisted Pyrolysis of Polymeric Precursors: A New Method to Synthesize Low-Dimensional Nanomaterials

Making Nanostructured Ceramics from Micrometer-Sized Powders via Grain Refinement During SPS Sintering

Chemical vapor processing and applications for nanostructured ceramic powders and whiskers

Synthesis And Growth Mechanism Of Silicon Nitride Nanostructures

Carbothermally prepared nanophase SiC/ Si3N4 composite powders and densified parts

Effect of In Situ Grown SiC Nanowires on the Pressureless Sintering of Heterophase Ceramics TaSi2-TaC-SiC

Synthesis of Silicon Nitride/Silicon Carbide Nanocomposite Powders through Partial Reduction of Silicon Nitride by Pyrolyzed Carbon

Morphology-Controlled Synthesis of SiC Nanowires by Catalyst-Assisted Pyrolysis of Polymeric Precursor

Preparation and properties of fibrous monolithic ceramics by in-situ synthesizing

Fabrication of Si3n4/Sic Nanocomposites by Spark Plasma Sintering of Amorphous Sicn Powders Derived from A Polymeric Precursor

Controlled growth of SiC crystals in combustion synthesis

Synthesis and Characterization of Superconducting NbC Nanotubes