Abstract:Polycarbosilane (PCS) serves as a crucial precursor for silicon carbide (SiC) fibers and ceramics. However, both of the precursor and the resulting SiC ceramics are carbon-rich, which is often viewed as detrimental to their relevant high-temperature properties. In this work, PCS is modified using nanosized Si particles to improve SiC grain growth and reduce carbon content in the resulting SiC ceramics, and the structural evolution during the polymer–ceramic conversion process has been meticulously investigated. The findings reveal that the incorporation of nano-Si into PCS raises its actual ceramic yield and accelerates the organic-inorganic conversion process. This is attributed to the formation of a more crosslinked structure at 200 °C–350 °C, resulting from the reaction between the Si–OH groups in nanosized Si and the Si–H and Si–CH3 groups in PCS. The carbothermic reaction between nano-Si and the free carbon starts at approximately 1200 °C at the periphery of nanosized Si particles, and is accomplished at around 1400 °C. This leads to the formation of large-sized reactive β-SiC. Simultaneously, PCS-derived β-SiC with smaller sizes is also formed at 1300 °C–1400 °C. At 1600 °C–1800 °C, the growth of the reactive and the derived β-SiC in nano-Si-modified PCS is both accelerated due to a substantial decrease in the free carbon content. Consequently, the grain size of β-SiC is much larger than that of unmodified PCS. Additionally, the residual amorphous free carbon transforms into nanocrystalline carbon at around 1400 °C and evolves into graphite carbon at 1600 °C–1800 °C, which exhibits a more ordered structure with larger size compared to that in unmodified PCS.

Tailoring crystal structure of high-entropy carbides in Si-based ceramic nanocomposites through precursor engineering

Novel Synthesis of (hf 0.25 Zr 0.25 Ti 0.25 Ta 0.25 )C-Sic Biphasic Ceramic Micro-Powders Using Single-Source-precursor Route

Fabrication, Microstructural Evolution, and Mechanical Properties of SiC/(Hf0.25Ta0.25Zr0.25Nb0.25)C/C Nanocomposites

Novel Synthesis of (Hf0.25zr0.25ti0.25ta0.25)c-Sic Biphasic Ceramic Micro-Powders Using Single-Source-precursor Route

In-situ fabrication of ZrB2-ZrC-SiCnws hybrid nanopowders with tuneable morphology SiCnws

Molecular-Level Processing of Si-(B)-C Materials with Tailored Nano/Microstructures

In-Situ Fabrication of ZrB2-ZrC-SiCnws Hybrid Nanopowders With Tunable Morphologies of SiCnws

Synthesis of Ceramic Nanocomposite Powders with in Situ Formation of Nanowires/Nanobelts

Synthesis and Characterization of Superconducting NbC Nanotubes

Increase of Specific Interfacial Coherence in Nanocrystalline Ceramic-Metal Composites

Preparation and mechanical behaviors of multiscale SiC nanowires/carbon fiber reinforced silicon oxycarbide ceramic composites

Improving SiC grain growth and reducing carbon content in pyrolyzed polycarbosilane using nanosized Si particles

Novel 0D-nanocarbon-silica ceramic composites: sol-gel synthesis and high-temperature evolution

Comparative study on the microstructure evolution and crystallization behavior of precursor-derived and mechanical alloying derived SiBCN

Structure evolutions of the polymer derived medium-/high-entropy metal carbides

From Bulk to Porous Structures: Tailoring Monoclinic SrAl2Si2O8 Ceramic by Geopolymer Precursor Technique

Synthesis and Spinnability of Vinyl-Grafted Carbon Nanotubes /polycarbosilane Precursor with High Ceramic Yield

Polycrystalline Nanograin Formation in Uniform-Sized Silicon Carbide Fibers Derived from Aluminum-Containing Polycarbosilane

Thermal evaporation and solution strategies to novel nanoarchitectures of silicon carbide

A strategy for enhancing ceramic densification in ultra-low temperature sintering: Shape-tailored nanostructure for crystal synthesis

Phase evolution and oxidation resistance of Si3N4/HfB2/HfB C N1–– ceramic nanocomposites prepared from tailored preceramic polymers