Abstract:Sir, Traditionally, cerebrospinal fluid (CSF) cell counts have been performed using hemocytometers like the Neubauer chamber. Unfortunately, this manual procedure is time-consuming, labor intensive, requires experienced technologists and is wrought with significant imprecision [1]. Advances in the automation of fluid cell counts have been necessitated with the aim of providing accurate results in a timely fashion. The main challenge with automated CSF cell counts is the difficulty in accurately determining very low white blood cell (WBC) counts with acceptable imprecision [2, 3]. Flow cytometry is one of the technologies that have been adopted in automating fluid cell counts particularly in enumerating and differentiating WBCs. Sysmex XT-4000i (Kobe, Japan) is an automated hematology analyzer with a fluid channel capable of analyzing various fluids including CSF using fluorescent flow cytometry. By measuring the forward and lateral scatter of incident light, it is able to derive information on the cell and nucleus size. The lateral fluorescent light emitted by the fluorescent dye is directly proportional to the amount of dye bound, which gives an idea on the complexity of the cell [4]. It has been reported that yeast can interfere with automated WBC counts performed on whole blood [5, 6]. A study comparing 3 automated analyzers found that spiking blood with yeast resulted in a significant increase in WBC counts and differentials in the Sysmex XE-2100 analyzer, which uses fluorescent flow cytometry [6]. While validating the Sysmex XT 4000i fluid channel at the Aga Khan University Hospital Nairobi (AKUH-N), we came across a CSF sample from a patient with Pseudomonas aeroginosa (P. aeroginosa) ventriculitis that repeatedly gave WBC counts several folds higher than the manual count. A cytospin preparation stained with hematoxylin and eosin revealed the presence of numerous bacilli but no WBCs. This prompted us to set up a series of experiments to investigate whether the falsely elevated WBC count by the automated analyzer was due to interference by bacteria and whether yeast could have the same effect. The study was carried out at the AKUH-N main laboratory. No ethical approval was required. For the first part of the experiment, 2 mls of sterile molecular biology grade water (Applichem, Darmstadt, Germany) was added into four Vacuette vaccutainers (Greiner bio-one, Kremsm€ unster, Austria) containing tripotassium ethylenediaminetetraacetic acid (K3EDTA), sodium heparin, sodium fluoride with K3EDTA and 3.2% sodium citrate, respectively. A further 2 mls of the molecular biology grade water was added to six sterile test tubes. Freshly subcultured American type culture collection (ATCC) standard organisms were then added to five of the six sterile test tubes using a sterile wire loop to achieve a final concentration of approximately 0.5 ( 0.05) McFarland turbidity standard. This concentration is approximately equivalent to 1 9 10 cfu/mL for bacteria and 1–5 9 10 cfu/mL for yeast. The McFarland estimation was performed using the DensiCHEK plus optical density reader (BioMerieux, Lyon, France). Cell counts were then performed within 10 min of mixing bacteria or yeast using the Sysmex XT 4000i fluid channel. The internal quality control for the 1 month preceding performance of the experiment was within acceptable limits with coefficients of variation (CV) of between 0.6–1% for red blood cell (RBC) and 2.0–2.6% for WBC counts. Each sample was analyzed once by a technologist blinded to the contents. For the second part of the experiment, pooled CSF was used to test for interference in WBC counts by micro-organisms showing significant interference in the first part of the experiment. Two randomly selected CSF samples submitted for routine CSF analysis were used. Both samples had been collected in K3EDTA vaccutainers and had WBC counts of 3 and 8 per uL as determined by the Sysmex analyzer. Manual counts for both CSF samples were performed using an improved Neubauer chamber (Marienfeld-superior, Lauda-K€ onigshofen, Germany) and both had CSF WBC counts of less than 5 /mm

Sol-Gel-Derived Siboc Ceramics with Highly Graphitized Free Carbon

The role of carbon in microstructure evolution of SiBCO ceramics

Pseudo low-temperature sintering effect and microstructure evolution of SiBCO ceramics

High Temperature Structure Evolution of Macroporous SiOC Ceramics Prepared by a Sol–gel Method

Interference of cerebrospinal fluid white blood cell counts performed on the Sysmex XT‐4000i by yeast and bacteria

Polyborosilazanes with Controllable B/N Ratio for Si–B–C–N Ceramics

Optimal preparation of high-entropy boride-silicon carbide ceramics

Carbon contamination of elemental beta-boron promoted a stable boron carbide by spark plasma sintering

Effects of boron source on properties of pressureless solid-state sintered silicon carbide ceramics

Boron-carbon doped Silicon Carbide Fibers: Preparation and Property

Preparation of Silicon Carbide Using Bamboo Charcoal As Carbon Source

Trapping of metal atoms in vacancies of carbon nanotubes and graphene.

Polymer derived SiBCN(O) ceramics with tunable element content

High Thermal Conductivity in Pressureless Densified SiC Ceramics with Ultra-Low Contents of Additives Derived from Novel Boron–carbon Sources

Preparation of Amorphous SiOC Ceramic Powders through Precursor Polymer Pyrolysis

Porous sodium borate-bonded SiC ceramics

Exploration of an atomic‐scale boron additive in SiAlON ceramics

Investigation of the effect of impurity of precursor materials on Si‐doped boron carbide properties

Polyborosilazane‐Derived High Temperature Resistant SiBCNO

Effect of boron content on the microstructure and electromagnetic properties of SiBCN ceramics

Pressureless sintering of boron carbide ceramics with Al–Si additives