Abstract:Negative temperature coefficient (NTC) thermistor materials based on (LaMn 0.5 Co 0.5 O 3 ) x –(Ni 0.66 Mn 2.34 O 4 ) 1−x (0 ≤ x ≤ 0.5) composite ceramics, are fabricated by the conventional solid-state reaction method. The crystal structure, surface morphology and electrical properties of the composite ceramics are investigated and characterized by X-ray powders diffraction (XRD), scanning electron microscope (SEM), and Agilent digital multimeter, respectively. XRD results show that main phases of as-sintered ceramics are a cubic spinel structure Ni 0.66 Mn 2.34 O 4 phase and a rhombohedral perovskite structure LaMn 0.5 Co 0.5 O 3 phase. SEM images indicate that the grain size of the composite ceramics decreases with increasing the low-resistivity perovskite phase. The ρ 25 and B value of the composite ceramics decreases with increasing x, and the B is still reasonably high in the range of 4000–3500 K when x ≤ 0.2. Meanwhile, the introduction of the perovskite phase leads to a decrease in the resistance drift, which the ΔR/R 0 is relatively low (0.26–1.8 %) after annealing at 125 °C for 600 h in air atmosphere. These findings exhibit that (LaMn 0.5 Co 0.5 O 3 ) x –(Ni 0.66 Mn 2.34 O 4 ) 1−x (0 ≤ x ≤ 0.5) composite ceramics have a higher electrical stability in comparison with Ni 0.66 Mn 2.34 O 4 ceramics, are helpful for meeting demands for obtaining better stability and performance of NTC composites ceramics.

Design for High-Performance Functional Composite Thermistor Materials by Glass/ceramic Composing

Design for strontium-lead titanate based composite thermistor materials via chemical processing

Strontium-Lead Titanate Based Composite Thermistor Materials

Study On The Properties And Conduction Mechanism Of Strontium-Lead Titanate Based Composite Thermistor Materials

Grain Boundary Effects in NTC-PTC Composite Thermistor Materials

A novel environmentally friendly linear thermistor in the xAl2O3-(1-x)ZnO composite

Water-Stable Hybrid Lead-Free Perovskite for Negative Temperature Coefficient Thermistors

A novel MnCoNiCuZnO5 complex-phase ceramic for negative temperature coefficient thermistors

Preparation and characterization of LaMn 0.5 Co 0.5 O 3 –Ni 0.66 Mn 2.34 O 4 composite NTC ceramics

Design of negative/nearly zero thermal expansion behavior over a wide temperature range by multi-phase composite

New negative temperature coefficient thermistor ceramics in (Y 2 O 3 + CeO 2 )–LaCr 0.5 Mn 0.5 O 3 composite system

Synthesis and high thermal stability of Mn doped Y2/3Cu3Ti4O12 negative temperature coefficient ceramic

Ceramic/Metal Composites with Positive Temperature Dependence of Thermal Conductivity

A novel (Sm0.2Eu0.2Gd0.2Ho0.2Yb0.2)CrO3 high-entropy ceramic nanofiber as a negative temperature coefficient thermistor

SrCexNbxWO4+4x: A novel NTC ceramic for high-temperature thermistor with a wide temperature range

Novel NTC ceramics based on pyrochlore-type A2Ti2O7 (A = Sm, Eu, Y) titanates for high-temperature thermistors

MgAl 2 O 4 –LaCr 0.5 Mn 0.5 O 3 composite ceramics for high temperature NTC thermistors

Sintering Temperature and Impedance Analysis of Mn0.9co1.2ni0.27mg0.15al0.03fe0.45o4 Ntc Ceramic Prepared by W/O Microemulsion Method

Effect of particle contact on the electrical performance of NTC-epoxy composite thermistors

A New Polymer Composite Thermistor Having Double PTC Transitions

Rare Earth and Perovskite Composite Ceramics Applied for the Thermistor with Wide Temperature Range