Abstract:BaTiO3-（Bi1/2Na1/2）TiO3 （BT-BNT） positive temperature coefficient of resistivity （PTC） ceramics were successfully prepared by a wet-chemistry route. With 2 mol％ BNT addition, the obtained BT-BNT ceramics had semiconductivity and exhibited a PTC behavior at about 155℃ . The onset temperature of the PTC effect increased to 165℃ for the 4 mol％ BNT added samples. Room-temperature resistivity rRT increased with the content of BNT added and the ceramics changed from a semiconductor to an insulator, which was consistent with the variation of the microstructure. The temperature of resistivity anomaly in BT-BNT ceramics also increased with increasing BNT content. A small amount of manganese （Mn） dopant was found to improve the PTCR effect in the BT-BNT system. The possible mechanism underlying the PTCR effect in BTBNT ceramics was proposed. We also observed PTC effect on the ceramics sintered in a N2 flow with low O2 concentration. With the addition of BNT, the samples exhibit resistivity jumps of 103-105 starting at 190-210℃. X-ray diffraction results indicate that the BNT phase and BT phase formed a solid solution during sintering. An electrically heterogeneous structure, consisting of the grain interiors, outer grain shells, and grain boundaries, is revealed by the complex impedance analyses. The observed dc resistivity jump is attributed to the rapid resistivity rise in both grain boundaries and grain shells.

Design for strontium-lead titanate based composite thermistor materials via chemical processing

Strontium-Lead Titanate Based Composite Thermistor Materials

Study On The Properties And Conduction Mechanism Of Strontium-Lead Titanate Based Composite Thermistor Materials

Grain Boundary Effects in NTC-PTC Composite Thermistor Materials

Design for High-Performance Functional Composite Thermistor Materials by Glass/ceramic Composing

Influence of grain boundaries on the properties of Sr0.4Pb0.6TiO3 thermistors

The thermal sensitivity and dielectric properties of SrTiO3-based ceramics

Effect of sintering condition on microstructure and dielectric properties of BSTN composite ceramics

The Variable Thermal Sensitivity of Strontium-Lead Titanate Semiconducting Ceramics

Strontium-lead titanate PTCR ceramics prepared by chemical processing

Preparation and electrical properties of semiconducting strontium—lead titanate PTCR ceramics

Microstructures and dielectric properties of Ba0.5Sr0.5TiO3–Zn2TiO4 composite ceramics with low sintering temperature for tunable device applications

Strontium-lead Titanate Ceramics with Positive Temperature Coefficient of Resistance

A Study on the Properties of (Y, Mn) Co-Doped Sr0.5Pb0.5TiO3 Thermistors

Effects of Ion Diffusion and Dielectric Composite on Properties of Highly Tunable Ba2SiO4– Ba0.4Sr0.6TiO3 Composite Ceramics

High thermoelectric properties of P-SiGe/Sr0.9La0.1Ti0.9-xZrxNb0.1O3 composite

Effect of Cr Addition on the Structure and Electrical Properties of CaCu3Ti4O12 NTC Thermistor

Investigation of the Positive Temperature Coefficient Resistivity of Nb-Doped Ba0.55Sr0.45TiO3 Ceramics

The Preparation of Fine-Grained Positive Temperature Coefficient Resistance with Superior Electrical Properties

Influence of lithium modification on the properties of Y-doped Sr0.5Pb0.5TiO3 thermistors

Synthesis of Lead-Free PTC Thermistor Materials Using Fine Powders with Core-Shell Structure