Abstract:Thermal management has become an important issue to be solved in the miniaturization and weight reduction of electronic equipment, especially in the aerospace field. The doped BaTiO3, as a selfregulating heating material, exhibits an attractive application perspective on the thermal control of electrical devices, resulting from its positive temperature coefficient (PTC) property. However, the Curie temperature of most of the doped BaTiO3 material at present is much higher than the operating temperature of the electrical equipment. On this basis, this paper focuses on the controlling of the Curie temperature and thermal control performance of the BaTiO3-based heating component. The polycrystalline Ba1-xSrxTiO3 was synthesized by solid solution reaction. The Curie temperature is tuned by the content of the strontium element, simultaneously the elements Y and Mn are doped to reduce the room temperature resistivity and improve the PTC effect. The X-ray diffraction demonstrates that the bulk phase of the Ba1-xSrxTiO3 generates in the pre sintering process, while the crystallization of composition has completed during the sintering. Importantly, the Curie temperature of doped Ba1-xSrxTiO3 for x=0.3 with average particle size of 4.86 gm has shifted to around 38 C, beyond that exhibiting a 2.8 -orders magnitude of PTCR jump. Results of the thermal control experiment show that, in contrast to the ordinary resistor heater, the heating element based on the BaTiO3 PTC material can achieve lower equilibrium temperature without any auxiliary control methods. Compared to the traditional thermal control system composed by the ordinary resistor, sensor and controller, the novel thermal control system based on PTC heating unit possesses simple structure, lightweight and excellent reliability.

Investigation of the Positive Temperature Coefficient Resistivity of Nb-Doped Ba0.55Sr0.45TiO3 Ceramics

Study on Positive Temperature Coefficient of Resistivity of Co-Doped BaTiO3 with Curie Temperature in Room Temperature Region

Low temperature fired positive temperature coefficient resistors

New high temperature NTC thermistors based on BaSm2Ti4O12 ceramics

Low temperature sintering behavior of B2O3 vapor in BaTiO3-based PTCR thermistors

Study On Thermal Control Behavior By Using Batio3-Based Ptc Materials With Room Temperature Curie Point

Development and Characterization of a Novel BaTiO3-Based Material for Medium Temperature Applications

Temperature-dependent resistivity performance of Mn/Y-doped Ba1-xSrxTiO3 compositions with potential thermal control applications

The electrical properties of (Ba, Ca, Ce, Ti, Zr)O3 thermistor for wide-temperature sensor architecture

Strontium-lead Titanate Ceramics with Positive Temperature Coefficient of Resistance

High thermoelectric performance of Nb-doped SrTiO3 bulk materials with different doping levels

Characterization of NiO based ceramics modified with Y2O3/BiSbO3 for application of NTC thermistors

A Study Of V-Shaped Ptc Behaviour Of Sr0.4pb0.6tio3 Ceramics

Preparation and Properties of Liquid Y, Nb-codoped BaTiO3-based PTC Ceramics

Strontium-Lead Titanate Based Composite Thermistor Materials

Design for strontium-lead titanate based composite thermistor materials via chemical processing

Medium-low temperature sintered Y-BaTiO3 ceramics modified by B2O3 vapor and its PTCR effect

Enhanced temperature range and stability in LaAlO 3 NTC ceramics through Ce-Nb codoping

The thermal sensitivity and dielectric properties of SrTiO3-based ceramics

Preparation and electrical properties of semiconducting strontium—lead titanate PTCR ceramics

Novel NTC ceramics based on pyrochlore-type A2Ti2O7 (A = Sm, Eu, Y) titanates for high-temperature thermistors