Abstract:A series of new negative temperature coefficient (NTC) thermal materials based on (Ba0.85Ca0.15)1-xCex/2(Zr0.1Ti0.9)O3 (0.00 ≤ x ≤ 0.20) ceramics were synthesized by a solid-state method. X-ray diffraction, scanning electron microscope and X-ray photoelectron spectroscopy were used to demonstrate the crystal structure, morphology, and composition of the (Ba0.85Ca0.15)1-xCex/2(Zr0.1Ti0.9)O3 ceramics, which were composed of solid solution based on the BaTiO3 phase. The average grain size of doped ceramic samples experienced the process of first decreasing and then increasing. The doping of Ce has reduced the sintering temperature. The temperature-dependent resistance analysis revealed that with the change of doping amount x, the thermal constant B300/1200 (1.21 × 104–1.13 × 104 K) and the activation energy Ea300/1200 (0.9777–1.0471eV) was initially increased to maximum values at x = 0.05, followed by the decreasing when x > 0.05. It has been established that the concentration of oxygen vacancies is affected by the transition between Ce4+ and Ce3+ provided by high levels of Ce doping. (Ba0.85Ca0.15)1-xCex/2(Zr0.1Ti0.9)O3 ceramics exhibited excellent negative temperature characteristics in the range of 300–1200 °C. Moreover, the temperature resistance linearity was improved after samples were aged. Hence, the (Ba0.85Ca0.15)1-xCex/2(Zr0.1Ti0.9)O3 ceramics were regarded as a promising material for high-temperature NTC thermistors in a wide temperature range.

A novel (Sm0.2Eu0.2Gd0.2Ho0.2Yb0.2)CrO3 high-entropy ceramic nanofiber as a negative temperature coefficient thermistor

Magnetic exchange bias and high-temperature giant dielectric response in SmCrO 3 ceramics

Novel high entropy (Y0.2Sm0.2Gd0.2Er0.2Ho0.2)3NbO7 nanofibers with ultralow thermal conductivity

A2Zr2O7 (A = Nd, Sm, Gd, Yb) zirconate ceramics with pyrochlore-type structure for high-temperature negative temperature coefficient thermistor

Vacuum Hot Pressed Highly Dense, Nanograined Mg(Al1−xCrx)2O4 Ceramics

Synthesis of YCrO 3 ceramics through a field-assisted sintering technique

A novel MnCoNiCuZnO5 complex-phase ceramic for negative temperature coefficient thermistors

SrCexNbxWO4+4x: A novel NTC ceramic for high-temperature thermistor with a wide temperature range

Enhanced thermistor performance of LaCrO 3 through high-entropy strategy

New negative temperature coefficient thermistor ceramics in (Y 2 O 3 + CeO 2 )–LaCr 0.5 Mn 0.5 O 3 composite system

Ultra-high Melting Point Ho3+, Yb3+ Co-Doped HfO2 Single-Crystal Fibers for High-Precision and Robust Ratiometric Thermometry Towards Harsh Environments

Investigation of pyrochlore-type A 2 Sn 2 O 7 (A = La, Nd, Sm, or Gd) ceramics as negative temperature coefficient thermistors for high-temperature application

Enhancement in the linear electrical properties and thermal stability of chromite perovskites through entropy engineering

New high temperature NTC thermistors based on the Mg(Al1−xCrx)2O4 ceramics

The electrical properties of (Ba, Ca, Ce, Ti, Zr)O3 thermistor for wide-temperature sensor architecture

Novel NTC ceramics based on pyrochlore-type A2Ti2O7 (A = Sm, Eu, Y) titanates for high-temperature thermistors

YCr0.5Mn0.5O3 negative temperature coefficient perovskite ceramics sintered under reducing atmosphere: Microstructure and electrical properties

Synthesis and high thermal stability of Mn doped Y2/3Cu3Ti4O12 negative temperature coefficient ceramic

Rare-earth zirconate high-entropy nanofibrous porous ceramics for high-temperature thermal insulation applications

Sintering Temperature and Impedance Analysis of Mn0.9co1.2ni0.27mg0.15al0.03fe0.45o4 Ntc Ceramic Prepared by W/O Microemulsion Method

A novel environmentally friendly linear thermistor in the xAl2O3-(1-x)ZnO composite