Abstract:Negative temperature coefficient (NTC) thermistors have garnered increased attention due to their high sensitivity, low thermal inertia, and cost-effectiveness. However, their practical application is significantly constrained by a limited temperature range and poor stability. In this study, a series of Ce-Nb codoped LaAlO 3 ceramics were synthesized using the traditional solid-state reaction method, and their unique electrical properties as NTC thermistors were examined. XRD analysis reveals that Ce-Nb codoping induces lattice distortion in the LaAlO 3 ceramics. HAADF-STEM shows that Ce replaces La at A-sites, while Nb substitutes for Al at B-sites. XPS indicates that the substitution of Ce 4+ for La 3+ and Nb 5+ for Al 3+ facilitates the formation of oxygen vacancies and enhances the number of free carriers. Electrical resistance and UV measurements demonstrate that increasing the Ce and Nb doping levels improves carrier mobility and reduces the band gap of LaAlO 3 . These modifications significantly enhance the electrical performance and extend the temperature range to 298 K –1773 K when the Ce doping level is 0.2 and the Nb doping level is 0.1. Additionally, aging tests indicate that Ce-Nb co-doping reduces the aging drift of LaAlO 3 to 0.38 % after 500 h of aging at 1273 K. This novel Ce-Nb codoped LaAlO 3 ceramic, with its broad temperature range and superior stability, shows significant potential for application in NTC thermistors.

Water-Stable Hybrid Lead-Free Perovskite for Negative Temperature Coefficient Thermistors

A novel environmentally friendly linear thermistor in the xAl2O3-(1-x)ZnO composite

High-stability solid solution perovskite (1-x) Bi0.2Sr0.5La0.3TiO3- xLaMnO3 (0.05≤ × ≤0.2) for wide-temperature NTC thermistors

Design for strontium-lead titanate based composite thermistor materials via chemical processing

Strontium-Lead Titanate Based Composite Thermistor Materials

NTC thermo-sensitive ceramics with low B value and high resistance at low temperature in Li-doped Mn0.6Ni0.9Co1.5O4 system

Design for High-Performance Functional Composite Thermistor Materials by Glass/ceramic Composing

A novel MnCoNiCuZnO5 complex-phase ceramic for negative temperature coefficient thermistors

Preparation and Characterization of Negative Temperature Coefficient (ni,mn) 3 O 4 –la(mn,ni)o 3 Composite

Synthesis and high thermal stability of Mn doped Y2/3Cu3Ti4O12 negative temperature coefficient ceramic

Negative Thermal Expansion Caused by the Antiferroelectric Phase Transition in Lead-Free Perovskite Ceramics

SrCexNbxWO4+4x: A novel NTC ceramic for high-temperature thermistor with a wide temperature range

A novel linear temperature thermistor in the xAl2O3-(1-x)CdSnO3 system

Study On The Properties And Conduction Mechanism Of Strontium-Lead Titanate Based Composite Thermistor Materials

Spinel-structured Ni-free ZnCuMnO (0.1 ≤ ≤ 0.5) thermistors of negative temperature coefficient

Novel NTC ceramics based on pyrochlore-type A2Ti2O7 (A = Sm, Eu, Y) titanates for high-temperature thermistors

Preparation and characterization of LaMn 0.5 Co 0.5 O 3 –Ni 0.66 Mn 2.34 O 4 composite NTC ceramics

Enhanced temperature range and stability in LaAlO 3 NTC ceramics through Ce-Nb codoping

Rare Earth and Perovskite Composite Ceramics Applied for the Thermistor with Wide Temperature Range

Investigation of the Positive Temperature Coefficient Resistivity of Nb-Doped Ba0.55Sr0.45TiO3 Ceramics

Enhanced electrical properties in lead-free NBT–BT ceramics by series ST substitution